Product Details:

Using a voltage indicator without first proving it is working correctly has proved fatal. The Martindale PD690 is a 700V AC proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations.

This device is designed for indicators with 230V and 415/440V AC detection ranges. The proving unit is one of the few designs to check indicators with ranges above 250V.

The PD690 can also check Drummond and other filament test lamps as its output is sufficient to illuminate the bulb.

There is now a facility to power the PD690 proving devices with the addition of a 12V DC power connection point. The units can be powered by either alkaline batteries or a 12V power supply. There are two power supply units available for the proving devices, the PSUPD230 and the PSUHPAT12. The PSUPD230 can be connected to mains power and the PSUHPAT12 is a 12v power supply suitable for use in a car/van cigarette lighter.

Please note: This model is not designed for use with multimeters.

Specification:
Output Voltage: 700V nominal
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery

Martindale PD690 - 700 Volt AC Proving Unit, Suitable For Any Brand Of 230V And 415/440V AC 2 Pole Voltage & Continuity Tester/Indicator, Can Also Test Drummond & Other Filament Test Lamps, Designed To Fully Check Voltage Indicators from Testermans

描述

常见问题