Bypass Module Cable for Aftermarket Alpine Video and Navigation Models Parking Brake Bypass Video in Motion Interface Module GOBGOD
Thumbnail 1Thumbnail 2Thumbnail 3

Bypass Module Cable for Aftermarket Alpine Video and Navigation Models Parking Brake Bypass Video in Motion Interface Module GOBGOD

3.0/5
产品编号: 131961845
安全交易
经常一起购买

描述

  • About this item
  • All Aftermarket Alpine Video and Navigation Models
  • OEM Factory lnstalled Alpine Models
  • Video automatic interface
  • Easy to install, no programming
  • Good compatibility and easy installation
  • ›See more product details

Troubleshooting DO NOT use scotch-lock or t-tap connectors. twist and tape , solder, or crimp all connections. The Bypass and Radio must be a good clean metal around. To rule out a bad ground, try a new ground by simply jumping a ground wire from the existing around connections to clean metal grounding point in the vehicle .(This is the most common issue in Nissan and Subaru Vehicles.) Temporarily disconnect any other wires turn on lead. Temporarily disconnect any other wires at this connection to determine if this is the issue. If this is the problem, diode isolation may be needed. WARNING! It is dangerous (and illegal in most states) for the driver to watch the video monitor while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. Install the Bypass only in Retail Display. RV, or Marine applications where there is no parking brake to interface to. Do not install the Bypass where the driving may be able to view the monitor where driving. Installation Instructions Connect BLACK wire on Bypass to BLACK wire [Ground(-)] on Alpine Radio (Also Connect to the Vehicle’s Ground wire) Connect BLUE wire on Bypass to BLUE/WHITE STRIPE wire ( remote turn on (+)) on Alpine Radio (This connection can also be shared with Amplifiers if Present) Connect YELLOW wire on Bypass to YELLOW/BLUE wire [Parking Brake(-)] on Alpine Radio only-do not connect to vehicles actual parking brake wiring/circuit Connect GREEN wire on Bypass to YELLOW/BLACK wire [Foot Brake(+)] on Alpine Radio only-do not connect to vehicles actual foot brake wiring/circuit , no connection if not present on Alpine harness

评论

3.0

全部来自已验证的购买

T**S

Wire colors do not match instructions

Instructions included with the bypass do not describe the correct wire colors which are on the bypass, and only reference wires on the radio correctly. Sent seller an email asking for detailed instructions that include updates to the color wires. I will update this review if I receive better information. I can probably install using a process of elimination, but this shouldn't be required if proper instructions were included.

D**C

Easy to install

This item is working perfectly. Been installed a couple of weeks now with no issues. Very simple to install only a couple of wires.

常见问题

TrustPilot

TrustScore 4.5 | 7,300多个评论

Rajesh P.

当我对产品有疑问时,客户服务非常出色。

2天前

维克拉姆·D.

MOLLE 护套质量非常好。我对这次购买非常满意。

2 周前

全球购物,通过 Desertcart 享受优惠
物有所值
各种产品的价格具有竞争力
全球购物
为 100 多个国家的数百万购物者提供服务
增强保护
深受全球购物者喜爱的值得信赖的支付方式
客户保证
深受全球购物者喜爱的值得信赖的支付方式。
沙漠车应用程序
随时随地随时随地购物。

目前缺货

Hong Kong店铺

抱歉,该商品来自我们 Hong Kong 商店缺货。我们很快就会补货 - 请回来查看或联系类似产品的支持人员。

TrustPilot

TrustScore 4.5 | 7,300多个评论

法蒂玛 A.

我尝试过的最好的国际运输。物有所值!

3天前

阿里·H.

发货快,包装精良。Leatherman 工具手感非常高档和坚固。

1天前

Bypass Module Cable For Aftermarket Alpine Video And Navigation Models | Desertcart Hong Kong