SCOPE OF APPLCATION 1)Smooth Surface:-Mirror,Smooth Glass, Smooth Tiles,Acrylic,Etc.... 2)Non Smooth Surface:- Antique,Mable,Frosted Glass,Rough Wood Furniture,Etc..(Note:-Rough Surface Should Be Less Than 1mm.) SIMPLE INSTALLATION Clean The Wall And Keep Dry;Tear Off The Protective Film,Don't Touch The Sticker And Avoid The Joint When Instal;Press The Sticker To Remove The Atmosphere,Make Sure To Keep Sticker Stick On The Wall Smoothly;Put On The Rack,Finish The Installation.Please Check If It Is Strong Enough Before You Use. Warm Tips:1)After Installation,Latex Paint Wall Or Wallpaper Installation Surface Mat Be Damaged,Please carefully Consider Whether You want To Install The Product On That Wall.2)The product Suitable In Temperature -20°c To 45°c.3)The Magic Sticker Can Not Be Bent,Otherwise It Can Not Be Normal Use.4)Due To The Storage Adhesion,Second Use May Reduce The Adsorption.Please Carefully Choose The Installation Location.5)If Made The Incorrect Installation,Please Dismantle Within Half An Hour,Tear Off The Sticker From Corner And Keep Flat,Wash In Warm Water Or Rinse,And Dy By Hair Dryer. PRECAUTIONS:1)Avoid Direct Sunlight,Keep Away From High Temperature And Fire When Use The Product.2)Avoid Using Alcohol And Dilute Product To Wipe Or Clean The product.3) It Can't Be Installed If The Surface Is too Rough,Convex Surface Is Too Large And Fragile.4)Dirty Wall,Dampness And Easy To Peel Off The Surface Of Peeling And Other Mounting Surface Can't Be Installed The Product.5)Do Not Hang Precious,Fragile Or Dangerous Items On This Product,Do Not OverWeight, So As To Avoid Unnecessary Losses.6)As Plastic,Iron,Stainless Steel And Other Accessories Part Is Very Sharp,Please Pay Attention To Avoid Scratches.7)Do Not Please The Product In Children Accessible Area To Avoid Injury.
