Stander Replacement 6-inch Walker Wheels, 6 Inch Rollator-Wheels for Adults, Seniors, and Elderly, Compatible with Stander's Wonder-Walkers and Wonder-Rollators, Set of 2

One of my mom’s Drive walker wheels had cracked and was wobbling when she pushed it. See the pick of the worn out tire next to the new tire. She only uses this walker inside her independent living. It rides on carpet, tile and vinyl flooring. The walker is about 7 years old. The walker’s original wheel measured just under 6”. I was going to order the two pack, but I decided last minute to order the 4 pack and I’m glad I did. One of the back wheels bearings all fell out removing it. Hair and dirt were embedded in the tires moving parts. This 4 set of wheels came packaged as two sets of two tires. Each set had a little wrench to fit the nut and an allen wrench to prevent the bolt from moving while you loosened the nut. This size allen wrench did not fit my mom’s walker’s existing hardware. Luckily I had brought extra tools. I needed a 3/16th allen wrench/hex key. I did not need any other tools but those two. The replacement was process was easy and took me about a half hour but I cleaned the walker. When you turn it upside down you see the messes they drop on the frame:0 I highly suggest taking notice of where the washer goes when disassembling, especially the fixed back wheels. You need to know when you reassemble. The Drive had a plate and a washer. Each package comes with 2 wheels, the wrench and the allen/hex key. You must reuse the axle bolt, nut and washer from the old wheel assembly. I learned not to tighten the swivel front wheel’s nut too tight or you can get the decorative nut cap on. I will update if these wheels fail or fall apart prematurely, but I doubt it since its basically an indoor walker. It’s 7/13/2023 and they are working great. So happy I replaced all 4 wheels and not just 1 or 2. If your walker is old, replace all 4 wheels! You could not tell how dirty the insides of the wheels were until I removed them. They were all in poor shape from old age. The walkers now rides smooth and I didn’t have to adjust her back locking brakes. To be honest I didn’t know how, but these new wheels locked in place so I let it be. So far I highly recommend the 4 pack.

Bought to replace broken wheel on rollator walker. Ease to change out in minutes. Well made and rolls smoothly. Would buy again!

These wheels worked great. I used these on a disc golf pull cart I made/modified. These fit perfectly on the 5/16” bar I used and with the built in bearings they rolled so much easier than the solid plastic wheels that I had originally used. I took a cooler bag cart, replaced the axle with a longer one (for stability) and added Velcro and hooks to keep the bag on. These wheels really made this modification work!!

Width was a little narrow. Cover wouldn’t stay on.

Wheels for my Nova GetGo were expensive and backordered until May, so I decided to take a chance on these fitting. I'm happy to say I put them on today and they work great! The only thing is that the included Allen wrench wasn't the right size for the GetGo axle bolt, but I have a set of Allen wrenches on hand and I had one that fit (5mm). Installation wasn't hard to figure out. Just keep track of the order and direction of items as you remove them (the nut has a smaller side that goes toward the outside). I'm only moderately handy and I was able to do it myself. The only tricky part is keeping the inner bearing on the wheel aligned so you can slip it over the axle bolt. I used the Allen wrench to hold it in line; you could use a narrow screwdriver or probably a chopstick, too. Very happy with the quality at this price. I only needed one replacement wheel (I crunched the old with my car!), but I'm glad to have a spare on hand for future use. I decided to replace both rear wheels, mostly for appearance, and to keep the old one that's not broken as a spare.

I used this product to replace a wheel with a worn out bearing on a Probasics walker. It was a simple process- easy and quick to complete. I did have to use an additional tool (a Torx screwdriver) to stabilize the particular bolt on the walker while removing the nut. This particular walker is only used indoors, but the wheel has been working fine since it was installed. I did find previous reviews very helpful with their descriptions of exactly how they completed the replacement. I would definitely recommend reading some of the prior reviews with more complete descriptions. The delivery was very prompt. So far, I am very satisfied and hopefully this wheel will hold up for the long term.

Perfect fit for Equate brand rollator.Each package of 2 wheels comes with 2 Allen wrenches and a wrench.Should be all the tools you need to change the wheels without going to the shed!

They seemed great but I ordered the wrong size.

Muy buenas

Parfait, exactement la même dimension que les anciennes, merci

Las ruedas son del tamaño perfecto para la parte delantera de la silla medline tanto la alto de la rueda como el diámetro interno de los baleros, comprare nuevamente de ser necesario. La relación costo beneficio es excelente!

I bought this item for my mothers drive Walker. She is in a retirement home and the wheels were replaced there before I was able to install this product. I did look at the wheels and they seemed a very good quality. I had to return this item for the reason above. I was initially confused with the return procedure but it turned out to be seamless. Thanks to this vendor and I will be recommending them to others that might be in need of an affordable product..

Muy sencillas de montar y se ajustan perfectamente. Lo mejor es que vienen con llave Allen y llave fija, así que no necesitas ni herramientas. Están montadas como ruedas traseras en mi caso, pero valen también para poner delante