Tablet Headrest Holder, Car Backseat Seat Mount Holder Universal 360 Rotating Adjustable for 6"-10.5" Tablet iPad Air iPad Mini, Samsung Galaxy

I spent entirely too much time quadruple checking around to make sure these were going to fit my specific car (2022 Chevy Traverse). Apparently the newer headrest options for specific car makes and models are more narrow than others? Who knew?! We not only live pretty much 30 minutes away from all the things, but we also frequently go on weekend trips and the occasional annual long haul vacation away with the kids in tow, so keeping the children occupied when looking out the window or talking isn't ideal is a must. Among the countless reviews of several products along these lines, including the OEM options, many begroaned instability with large/heavy devices. Well... I bought 2 of these and tested it on a 3 hour drive one way, and both held my children's 10.2in Gen 8 Ipads (Inside Osmo cases.... essentially a thin casemate case) and not once did we have falls or swinging around of the Ipads! Granted, you do need to fully tighten down all of the adjustment knobs to prevent that from happening, INCLUDING the ball joint! Logistically, I felt getting all of it set up into the correct position prior to the drive and locking everything in vs. leaving some room for my kids to move the devices around would be better for our specific needs, and I was correct on that. As long as the kiddos could see and reach the screens to change selections, they left it well enough alone.My only negative on the sturdiness side is 1) The further it is extended out, the more "jiggling" from the car is noted. The device is still secure in the holder, and the holder is still secure on the headrest... they aren't going anywhere... but if you have a child sensitive to motion sickness, be aware that the jiggling of the screen in front of their eyes will be more pronounced the further out the device is from the headrest. It's easily fixable by pushing it closer to the headrest where less momentum is placed on the extended arm, but as a parent of an easily motion-sick child, I just wanted to make others aware of that. 2) I can see the possibility that the adjustment knobs may loosen over time or eventually break. It's all plastic (with some foam pieces glued in for better grip hold where it needs to be), and depending on the weight and size you are putting on the end of that long arm and how far you extend it out, tighten and retighten the knobs, etc.... its a high possibility that this product is not going to last a lifetime. I could be entirely wrong, but that's my personal observation. I wouldn't hold it against the product itself... I wouldn't expect this sort of product to last ages, but I know some can be pretty critical in their search so again... I thought it worth mentioning.All in all, It's money well spent imho. It's not an eyesore, it's functional, does what it says it does, and its versatile. We plan to test out the Switch in it next to see how it does, but I can already say, these don't extend far enough out to be able to share one small screen between 2 captains chairs... it comes relatively close, but I imagine it'll cause a battle in children's eyes on who can't see as well.

Bien practico y util

I've bought these two times. I bought a red one and the black one for our two vehicles. They work well with phones and tablets.I have to get another one as the black one stopped staying in place when extended. This was after a couple years of a lot of usage. I'm good with that, because we used it a lot for the grandkids holding 10" and larger tablets. I highly recommend this headrest mount.

Use this for my boys nintendo switch. Work great and good durability.

Nice

I have some issues with this product but over all it’s a good buy if you are not overly picky. It installed well, no issues at all. We used this for our daughters fire tablet for a long car trip. First issue has to do with holding the tablet itself. If you have a case cover for your tablet you will run into problems. We had to remove the case in order for it to hold without falling out. The clasp only extends so far. Now for an IPhone it worked with non issues at all. Th other issue was my daughter was able to kick the mount easily so you will have to adjust the distance, if you have a compact space this product may annoy you more than help. However for us we were able to adjust it to where it worked for us 90% of the time. On a 10 hour road trip that was a good percentage. I would like to add the we had a toddler case on so it was extra thick, other slimmer cases may cause no issues. I would say it is worth a try just give yourself enough wiggle room in time to find out.

I have a Lenovo M9 tablet (9") with a non-giant/puffy case on it. This tablet mount says it fits up to 10.5" tablets, but it can't, unless you mount the tablet vertically. Just a warning to those of you out there that have tablets bigger than 7", this mount won't work for you to hold your tablet horizontally.Other than the size issue, the tablet mound does seem like it's high quality, it's easy to install, and it looks well made. Those are the reasons why I wanted to buy it in the first place, but the claim it fits tablets up to 10.5" was misleading in my case.

I have a 2004 F-350 Crewcab and wanted to use this in the back seat as a tablet holder for the toddler. Install was a little tough as the poles on my head rest were a bit narrower than this could collapse to per chance. Once installed, the movement of the arm was great and we could change the positions however needed and we were able to charge the tablet while in the holder which was great. Did its job great and I have no complaints!