Tub & Tile Refinishing Spray

This product did exactly what I needed it to do which was cover a small area I needed to repair after doing a compete bath tub refinish. There was an area about 12" x 12" where the refinishing product didn't adhere because I didn't prepare it properly, so the finish bubbled after a couple of months. I removed the finish that didn't adhere with a razor blade scraper, cleaned it well with acetone and applied the Rust-Oleum product in about 6 coats until the area was covered. I did this right before leaving on a week long vacation so it had plenty of time to cure. It looks great and matches the tub refinish color pretty well. It does had a strong lingering smell, so open windows and close the door. I definitely wouldn't use this product to do a compete tub refinish. You need to buy the roll on, two-part tub refinishing product and use this for small jobs and repairs. Just my opinion based my experience.

We originally painted our shower tiles with the paint can version of this product. We got this to touch up areas. It is so much better than the canned version because you can use this spray paint on multiple days. There isn't a time limit due to mixing. The odor is very strong. It is a must to open windows and keep the room ventilated. I would even suggest wearing a mask! This product covered the tiles perfectly! We let it sit for a week before using the shower. To allow the resin to cure. We did the scratch test on the tiles. It was well covered and didn't scratch off. It will take a few coats for this to really cover well, but it adheres so well to the tile. It is a bright white that really gives the bathroom such a bright and clean feel. Easy to use as well.

Rust‑Oleum’s 385291 Tub & Tile Spray Paint delivers exactly what you want from a refinishing product: strong coverage, a smooth finish, and a dramatic improvement to worn or yellowed surfaces. The spray goes on evenly, dries to a clean, glossy look, and really does make an old tub or shower fixtures look refreshed without the cost or difficulty finding replacement parts. It bonds well and feels durable once cured, giving the surface a much newer appearance. The one star off comes from an important detail to keep in mind: any moving parts, like spa jets, will no longer move freely once they’re painted. The coating is strong and thick enough that it essentially locks those components in place even if they are removed and painted as separate parts. If your tub has adjustable jets or other movable hardware, you’ll either want to mask them extremely well or remove them entirely before spraying or if they need to be refreshed too just know that they will no longer be movable once painted. Aside from that, the product performs beautifully. The finish looks professional, the coverage is good for the can size, and the overall transformation is impressive for a DIY project. If you prep properly and protect anything that needs to stay movable, this spray paint can make an old tub look almost new again.

There are SEVERAL ISSUES to complain about this product! First... I would like to point out that I myself am quite experienced with finishing with all kinds of products, spending several years of my life in the profession of doing high-end finishing and refinishing of metal and wood surfaces. It does not surprise me to see other reviews raving about this product. These are clearly from people that I feel do not know much about what they are talking about. So... here are my notes> 1) When (1) can cost close to $13, you would think that there would be enough paint available to adequately cover several square feet. This so called "epoxy" paint sprays out and covers in what I can best describe as ANEMIC. It will take several spray applications to simply build up the color to a point where it doesn't appear splotchy. You will need probably 6 or more cans to cover the surface of an entire tub. That in itself is bad... but that's just far starters. 2) The absolute pure white color will not match any "normal" white color of a bathtub (bathtub white is almost always subdued or off-white). It's hard to believe anyone would not notice that! 3) The "epoxy" paint lays on and dries without settling in like a normal spray paint such as lacquer or enamel, resulting in a very inconsistent and rough surface. One might suggest to simply spray more during each application to let it build up (filling in the porosity), but that does not work... and in the meantime you will have already used up one whole can for just a square foot! Ultimately, the surface needs to be wet-sanded appropriately to attain a smoother surface. 4) Along with all the issues that I just described, this spray expels some of the most noxious fumes you will ever encounter! Be prepared, and be sure to fully protect yourself, along with a fan in the window to draw out ALL those horrible fumes! 5) The preparation instructions (prior to actually applying this product) are long and detailed, describing the importance of cleaning and roughing up the surface for reliable adhesion. But, it's almost as if Rustoleum had never really worked with a bathtub ceramic surface to test their own product. When they describe sanding the original ceramic bathtub surface with regular sandpaper, this clearly shows they don't know what they are talking about. The ONLY material that will physically/mechanically etch a ceramic bathtub finish is real diamond abrasive. Fortunately, diamond cutting pads are readily available and affordable. I recommend starting with 100 grit to get all the high spots leveled out to the lows. At that point use 200, then 300, to get a fairly smooth 100% truly etched surface to spray on. That is the ONLY way to assure dependable adhesion (for any kind of paint). I will say one thing about this process... it's not easy... and will probably take a few days to complete just the preparation. But it's worth it. Final Note- I ended up just using this Tub& Tile paint (3 cans) as the undercoating/primer. After I wet sanded down all the roughness of the Tub&Tile paint, I actually used Rustoleum Professional Appliance White Enamel as a top coat, which yielded a much better finish overall. It's been 2 years since, and holding up and looking good. In my view, especially for the price, this should and could be a much better product!

Easy to apply. Works great on rusts; tubs and sinks. Durable and blends well when dry.

It works like magic.

I bought the bone color spray from home depot. Needless to say, it wasn't the color I wanted but that was all they had in stock during that time. I used it and it came out pretty poor. It had a rough texture, and 1 can of bone color could only cover 10 sqft with 1 coat. I bought the white color from amazon (the color I actually wanted), and I bought 2 because of my first experience with the bone color. But I was impressed with the white spray. It actually gave me 2 coats for 10sqft. And it spray on way nicer. Smooth to the touch, and larger spray coverage. I'm keeping the 2nd can because it worked so well. I would recommend this product, but I would avoid the bone color one and go for the white!

Es una pintura muy fácil de aplicar y muy resistente para revivir un montón de elementos de la casa, yo lo use en una tina, la apariencia quedó muy bien y hasta el momento logré resolver el tema del óxido. Muy buen producto.

نفس الصورة بالضبط ..مغلف جيدا وجديد واستخدامه جميل جدااا ولونه قوي

Pésimo producto a) no sirve para azulejos que se supone es para eso b) paquetería es un desastre, Amazon lo dió por Cancelado de tantas veces que según paquetería había intentado entregar. Tuve que hacer otro pedido con otra dirección y luego resuelta que activaron el Cancelado Ahora tengo dos productos iguales que NO sirven para nada !!!