Atr Tile Leveling Alignment System 100 3mm Floor and Walls T Spacing Plate.

Atr Tile Leveling is a 2 Part System with Spindles (Re-Usable) and Spacers that eliminate lippage in tile installation (No Tools Needed).

While every other system require 360 units for 100 pieces of tile, Atr require only 117.

You only need 1 cross spacing plate for 4 tiles Not 4 Clips like every other Leveling System, or 1 T' spacer compared to 3 with other systems

Grout spacer 1/8" (3mm) - Tile thickness 15/64 - 51/64 (1/4 - 3/4) (6mm-20mm)

Advantages of the Atr Tile Levelers

1. The universal Spindle removes cleanly and easily, without any force applied, eliminating risks of fragmenting tiles or leaving any unwanted obstructions behind
2. ATR Leveling System is the only system that does not leave any unwanted obstructions ie., (broken clips) between the grout joints once the spindle is removed
3. No Special Tools Required, for the advanced professional a simple socket and a cordless drill (optional) may be used to install and remove spindles, so you are not depending on a broken gun or a single gun on the job site.
4. The ATR spacing plates lock the tile into position giving you the most perfect intersection of the tile and straight lines without requiring consistent adjustments
5. Great labor saving 4 to 1 ratio

How to use 5 Easy steps

1. Screw spindle into spacing plate until screw tip is just visible at underside of plate.
2. Insert Tile Levelers spindle with spacing plate attached in between two tiles.
3. Lay adjacent tiles until all four corners, or two corners for the edge spacing plate are met.
4. Tighten spindle clock wise firmly until all four corners are lifted flush.
5. Remove spindle once tile adhesive is dry.

ATR Leveling System - 3UT100 Tile Leveling Alignment System 100 3 mm Offset Floors and Walls Spacing Plate

描述

常见问题