Old Dutch InternationalGriffe MTB Bonus Pack Rogue

I've been on a journey with a 2003 GT Palomar. I didn't care for how it rode, fit or shifted, when it was given to me new in 2004. So after a few short rides it was put in shed. When it saw daylight for a ride in 2013, it was hit on the rear wheel by a car. The wheel was bent so badly that I was barely able to limp it home with the V-brakes released. Then it went back in the shed.In 2021, it saw daylight again as I was going to junk it. I didn't think the cost of a wheel straightening, or new wheel and tune up at a bike shop was justified on a 20 year old $230 bicycle. But, it had less than 100 miles on it and seemed to be comparable with some new bikes in the $500 and up range. So I cleaned it up and figured I'd try to fix, service and sell it.I watched videos, then fixed the indexed shifting and straightened the wheel. From there the old GT a full tear down, cleaning and service.On a test ride, it was smoother and quieter than anything I'd ever owned. At this point, because of it's age, I figured no one would give me what I felt it was worth. It also had a Chrome Moly frame, that I prefer the ride of, over newer aluminum frames.So, I decided to try to make it fit me better instead of selling it.I replaced the stock seat post with an Orign8 400mm and the bars with Bucklos risers to make the bike fit better.While, it fit better it still wasn't right. So, I thought new grips would feel better and might help with the fit and handling issues.Based on some research and reviews, I decided to try the ODI grips. Especially as several reviews mentioned that they were comfortable and fit larger hands.Even though they were longer than the 100mm stock grips on the GT, I ordered them in.Hindsight being 20/20, I ordered these grips, before trying to simulate how a 130mm grip would feel on my bars with the grip shifters. When I simulated a narrower hand position on the bars during a ride, I found that the bike felt worse. But, when I tried a wider hand placement on the bars, the bike rode better.So I figured when the ODI grips arrived, I'd return them and began searching for grips that seemed as plush as the ODI, but narrower than the stock 100mm grips I had. Unfortunately, I didn't find anything else I wanted to try.When the ODI grips arrived and I put my hands around them, they felt great. They are very comfortable. Firm, but have give when squeezed and are not slick on a bare hand. They are also larger, outer diameter, than my stock grips. But, they were too long for what I wanted.After looking at how the grips are constructed and how the locking rings work, I decided to try to modify them to meet my needs.I took a measurement, a deep breath and felt stupid taking a hacksaw to these brand new grips. A utility knife and file were also used to complete the job.In the end, the modification worked perfectly and the grips are maybe 80mm now. They solidly lock on to the bars, feel great and work perfectly with my Revoshift shifters.I've done about 100 miles so far, bare hands and with light gloves, both on pavement and light trails. All has been good and comfortable.No regrets on this purchase and I bought another set to replace the old Oury's on my 2006 Cannondale F2000SL.Please know the grips did not solve my riding and handling problems with the GT.I found more video's on riding position and eventually, after gradually lowering my seat about 1/2" and moving it forward about 1/4", the bike became a great handling, stable, ride. I also played with rolling my bars, shifters and brake levers slightly forward and backward until I found the "sweet spot".In the end, the final piece of the puzzle was swapping the Bucklos 620mm risers for 720mm carbon handlebars. I took a chance and that extra 100mm in width resolved the handling issues I still had.Hope this helps and ride safe.

Love these grips. Tacky and tough.

I needed some grips since the oem grips were destroyed. These are perfect, and they are soft and grippy making it perfect for riding with or without gloves. I recommend these to all my riding buddies. Top tier grips!

What a big difference between the ODI grips and the stock grips that came with my MTB. The ODI are thicker so are a better fit for my hands, as well as being soft, pliable, and comfortable without going flat or falling apart like some foam grips would. Because of how soft they are, they also grip well, without feeling like they are sticky or coated in some kind of adhesive. Just to give you an idea of its grip, once properly installed with the locking rings, if you grab the grips as tight as possible and try to twist, your hand, nor the grip, is going anywhere.

I've put in a few rides on these grips and man are they comfortable! They are very plush but not to the point you lose any feel of what the bike is doing beneath you. You could definitely use these grips without gloves and still feel comfortable. I especially like the grippiness of the material they're made of, it's confidence inducing. Also, They are thicker than the stock grips on my 2018 Trance 2 and to me that's a good thing. Not that the stock grips were bad but these definitely feel better on my average sized hands. I only gave three stars to the durability category because I've only had them for a few weeks. We will see how long they last but you can't go wrong with ODI. The one thing that irks me about these dual locking ring grips is that one screw of one locking ring faces away from the rider and the other faces towards the rider. It really sets off my OCD!! Lol Other than that small, maybe insignificant to others, nuisance these grips are excellent.Update: I had my front wheel washout on me at 20+ mph, handlebar crashed into the ground and the end cap on the grip stayed in place. There was only minor scratching on the locking ring. Looks like these grips and its components are made to last.

A must have upgrade for your mountain bike. Absolutely killer grip for the design, your hands really dig in with the design. Kind of a pain to get on though. Not as hard as getting on the little end caps but it's manageable. HOWEVER... These things stabbed the s*** out of me. The surface of where the threading is had burrs and when I was working with them I got little pieces of metal jabbed it my thumb. I actually used high grit sandpaper to smooth it out and make sure I didn't get stuck again. Highly recommend but be careful and inspect for burrs before handling.

These have to be the best grips that I've ever used. A friend of mine was raving about these and my right grip just ripped so I read the reviews on Amazon and they conveyed the same sentiment. The grips arrived on time and I went straight to the garage to install them. I was already half way through the install when i realized the package was missing the locking ring and the caps. It did read some other reviews who experienced the same thing but I figure it might be a one off. I guess I was another unlucky customer. I contacted Amazon and they promptly shipped out another package along with a return slip for the first pair. Yes, this was annoying but I'm not going to dock any stars from the product itself because they are amazing. They are the most comfortable grips that I've ever used and they just look slick on the bike. The lock rings are metal and clamp on to the handle bar with ease. The end cap is plastic and I'm not sure how they will hold up over time but they lock in place very tight. The grips are spongy for some added comfort but not mushy where you lose control. The biggest thing I've noticed is that my hands no longer fall asleep on those long epic adventures through the trails. Love these things. They are a bit expensive compared to other options but they are well worth the price. The only thing I regret is not buying these sooner.