Doesn’t it hurt? The Avashine nose wax kit has to be tried to be believed. 90% of the people who try nose hair removal by using our wax hair removal kit say other than a tugging sensation, the hair removal process is not painful. How do I use the Avashine nose hair removal wax kit? 1. There are two ways you can prepare the wax: - Firstly you can use a microwave by first adding 20ml of water to the measuring cup, put the paper cup on top of the measuring cup, add an appropriate amount of wax pellets and microwaving it all until the pellets have fully melted (roughly 1-2 minutes) - Secondly you can add 60 ml of hot water to the measuring cup, place the paper cup with wax pallets on top, and wait until the pellets melt (roughly 2-3 minutes) Test the temperature of the wax on the back of your hand before use to make sure it is not too hot for your nose. 2. Dip the nose of the applicator stick into the warm wax, taking care to put enough wax on the round tip, but not on the flat guard section. If too much wax is on the stick, tap it gentling on the side of the cup to get rid of the excess. 3. Insert the wax covered tip into the nostril, slightly rotating the applicator to make sure the wax is evenly spread over all the nose hair, and press the nose wing so that the wax gets well in contact with the nose hair. Leave the applicator and allow the wax to solidify for 90-120 seconds and no longer. 4. With one hand holding the two sides of the nose wings firmly, pull the applicator down briskly. Tip: if you pull it too slow, it will be painful, so pull it down as fast as you can. 5. Enjoy a nose hair-free look and feel for up to 4 weeks!
