Colour:(Black) Specifications Battery capacity: 500mAh lithium battery Low battery: LED1-LED4 flashes (flashing) Charging: LED1-LED4 flashes slowly Charging complete: LED1-LED4 is always on It can be charged using the configured USB cable, charging time is about 2.5 hours. Low voltage alarm: If the voltage of lithium battery is lower than 3.55v 0.1 v, the current channel light will flash to indicate low voltage; When the lithum battery voltage is lower than 3.45v 0.1 v, it will automatically go to sleep. Connection 1. Press "Y" + "Home" for 2 seconds to open your switch device, enter BT search mode, LED1- LED4 flashing. 2. Go to your switch home page to click on controllers, then click on "Change Grip"/ "Order" and wait for controller to sync up. LED will become stable when connection is successful. 3. Controller will auto reconnect to your switch after press "Home" key for 4 seconds once it has been paired. 4. USB connection: Connect the controller to your switch device via USB cable after step 1. Power saving 1. Home screen off, the gamepad will automatically sleep. 2. In the BT mode, press the "Home" for 3 seconds to disconnect from the host. 3. If no operation within 5 minutes, it will sleep automatically (including immobility of sensor). Press "Home" to wake up your controller. Support: How to update the firmware? Press the L3 on controller and plug in the PC-USB to enter the upgrade state. Open the firmware update tools in your PC and follow the steps to upgrade the controller software. Packing list 1x Switch wireless controller 1x Instructions manuel
