下载应用程序

我们从

阿联酋
英国
印度
美国
日本

客户服务

关于我们

客户支持

Desert Online General Trading LLC

Dubai, United Arab Emirates

bayite

Q: Can you use a toggle switch to reverse the small gauge wires so you can read either draw or charge while under load?

FYI in the solution I offered above, it requires you to install the shunt for the charge circuit on the negative cable between your charging devices (all of them) and the negative post on the battery. The shunt for the load circuit should be on the negative cable between you negative battery post and the negative cable for you load panel. The load panel should have all your loads, both DC and inverter. The drawing that baylite provides does not show any dc loads. The common connection point should be the battery terminals. I hope that is clear.

Q: Very happy, what's the proper way to read the "energy" section of the panel? Is it real time or an average of watts per hr?

It is neither of those. The Energy section measures how much power you have used over time, i.e., the cumulative total of watt-hours. A watt-hour is equal to one watt of power used over the course of one hour. If you have a 5-watt LED bulb and you power it for 3 hours, your Power reading would consistently read 5 W for the whole time you're powering the bulb ("real time," like a speedometer), and the Energy reading would gradually change from 0 to 15 Wh over that 3-hour period (cumulative total, like an odometer).

Q: does this meter count up the amp hrs used and then start subtracting them when charging begins. Giving you a running total

I bought two meters, so one measures charge, the other discharge. (Just wire the sensor wires in reverse for the discharge)

Q: I am getting the entire display blinking when i put any load on the system. it blinks all zeros. i have it set for 100a, but am less than 100A

If your display is flashing or the reading seems out... (also if the reading stays 0 you probably have the wires from the shunt the wrong way round)The problem is the length of wires from where the shunt is (if it is not right next to the battery) causes a voltage drop across the cable that influences the reading and in most causes will cause the meter to flash as I suspect this is the over-read indication. (I am using three meters to measure two banks of solar panels and a wind generator)Solution: tie the battery side of the shunt wire to both 0v points on the meter . i.e. bridge the two inner pins of the connector and take the wire only to the shunt, this then takes the voltage drop over the cable to the battery out of the equation.

产品编号: 17291539

安全交易

细节

Brand
bayite
Power Source
DC
Style
Ammeter Power
Color
Blue
Item Weight
7.04 Ounces

⚡DC 6.5~100V

📊0~9999kWh

🔋0~100A

经常一起购买

bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt

TKDMR 160Pcs Copper Wire Lugs AWG2 4 6 8 10 12 with Heat Shrink Set, 80Pcs Battery Cable Ends Ring Terminals Connectors Tubing Assortment Kit

TKDMR 10pcs 1/0 AWG-3/8 Battery Lugs,Heavy Duty Wire Lugs,Ring Terminals,Battery Cable Ends,0 Guage terminals,Battery Terminal Connectors with 10pcs 3:1 Heat Shrink Tubing

描述

🔍 Monitor Your Power Like a Pro!

COMPACT VERSATILE - Perfect for both professional and DIY projects, this meter is a must-have tool.
OVERLOAD PROTECTION - Stay safe with an alarm function that alerts you to potential overloads.
SMART ENERGY MANAGEMENT - Store and reset energy data effortlessly, even during power outages.
USER FRIENDLY INTERFACE - Enjoy a large LCD display with customizable blue backlight for easy visibility.
PRECISION POWER MONITORING - Stay ahead with real-time voltage, current, and power readings.

The bayiteDC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter is a versatile multimeter designed for precise monitoring of voltage, current, power, and energy. With a test range of 6.5 to 100 volts and 0 to 100 amps, it features a large LCD display that shows multiple readings simultaneously. The device includes an overload alarm for safety and can store energy data even when powered off, making it an essential tool for both professionals and hobbyists.

有问题吗？看看别人问了什么

Can you use a toggle switch to reverse the small gauge wires so you can read either draw or charge while under load?

Very happy, what's the proper way to read the "energy" section of the panel? Is it real time or an average of watts per hr?

does this meter count up the amp hrs used and then start subtracting them when charging begins. Giving you a running total

I am getting the entire display blinking when i put any load on the system. it blinks all zeros. i have it set for 100a, but am less than 100A

常见问题

产品是真实而真实的吗？+

是的，所有产品均直接来自美国，英国，阿联酋和印度的授权零售商。我们保持严格的质量控制过程，并在运输前验证每种产品。所有项目都有适用的制造商保证，并由我们的标准退货政策涵盖。

交货需要多长时间，这是可靠的？+

送货时间因目的地国家 /地区不等，通常从3-9个工作日不等。每个订单都可以通过我们的系统完全跟踪。我们处理所有关闭范围，并使用可靠的快递合作伙伴进行最后一英里的交付。您将通过电子邮件和我们的应用程序定期收到有关您的订单状态的更新。

什么是凡人车？从安全订购安全吗？+

自2014年以来，落伍车是一个国际电子商务平台。我们每天在全球范围内安全地处理数千个订单。每个产品都会在交付前经过我们的质量验证过程，我们提供端到端订单跟踪，24/7客户支持以及全面的回报政策，以确保安全的购物体验。

产品定价如何计算？+

我们的价格包括产品成本，国际运输，进口关税，关税和当地交货费用。我们处理所有海关和导入程序，确保交货时没有隐藏的费用。 Pro会员将获得额外的福利，包括免费送货。

TrustPilot

TrustScore 4.5 | 7,300多个评论

全球购物，通过 Desertcart 享受优惠

物有所值

各种产品的价格具有竞争力

全球购物

为 100 多个国家的数百万购物者提供服务

增强保护

深受全球购物者喜爱的值得信赖的支付方式

客户保证

深受全球购物者喜爱的值得信赖的支付方式。

沙漠车应用程序

随时随地随时随地购物。

HK$326

关税和税费包括

Hong Kong店铺

免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

TrustPilot