6.1" Touch Screen Digitizer Glass Panel Fit For 2014-2016 Toyota Corolla Camry RAV4 Prius C Navigation Radio Monitor Climate LCD

Fixed a deteriorated RAV4 (2015) screen. Need some patience to install, but it is worth having a working screen.

I bought my 2015 Toyota Corolla S two years ago. As I left the dealership I realized the lower portion of the touchscreen was unresponsive. I contacted the dealer and I was told I purchased “as is”. They were right and I did but I will no longer purchase from them again. Regardless, I spent two years just dealing with the non-working touchscreen. I was able to do the credit card trick to program a new BT device once or twice. But, last week I bought a new cell phone and the credit card trick was not working. I started to shop around for a new head unit but realized with my steering wheel controls my budget would have to be near $1000 for all the equipment and adapters to keep everything OEM. Not interested. Well I started googling and YouTubing and realized there is an option to just change out the digitizer. And, from some of the videos I watched it was a rather easy task. I bought this digitizer for less than $20. In less than 30 minutes labor on my part I had a fully functional touchscreen after two years of doing without. So far it works great and I grant the product 5 stars. I will update if things change.

Worked great in my 2014.5 Camry. Replaced my malfunctioning touch screen. Wasn’t too hard to install and took maybe a hour and a half, but I’m experienced in electronics. Just be careful disconnecting any ribbon cables.

I had high expectations. I was initially reluctant to take on this project, but I watched a YouTube video and followed it to the T. I took notes, watched it over and over, kept my tablet with me to go over each step carefully. This was a total bomb. While I can see the display and the rear camera still works, there is absolutely no ability as touch screen. Moreover, even the buttons on the steering wheel work eraticaly. While I used to have some capability with the old, this doesn't work at all.

The lower half of the touch screen on our 2015 Camry had stopped working which seems to be a really common issue. This was inexpensive and following youtube videos took me about an hour to replace. It's easy if you have a basic comfort with using a screw driver and plugging in wire harnesses. it comes with everything you need but the screw driver. The radio and touch screen work perfectly now!

Worked perfectly in a 2015 Toyota Corolla. There are nice videos online that show the replacement process. Takes about 30 minutes if you are familiar with releasing the small ribbon cables. Make sure to re-use the rubber gasket from the original screen. Also watch the orientation and make sure the connector is in the correct orientation (my original ribbon "curled" in an opposite direction than the replacement and I almost installed it backwards). An inexpensive fix, way cheaper than a used or replacement radio.

This fits perfectly. Subtracted one star because the first one arrived cracked. The replacement had a bulge in the anti glare film like it wasn't completely flat when it was put on. The third one was perfect and connected right up. I no longer have to Jimmy a card past the bezel to click the bottom buttons. I'm happy with it. You'd never know it wasn't the original screen.

The ribbon was curled in the opposite direction it needed to be coming out of the box. After I flipped it around it worked perfectly on my 2014 Corolla. For any amateurs like me, YouTube was a good resource.

Team, You guys are a saviour with this product! Installation was extremely easy BUT take your time and do it slow, taking pictures of the wirings before and after installation to review you did it all correctly. An installation manual would have been great but it’s ok, given there are videos on Youtube for some reference. BUT the Audio/Navigation (AN) system many not be the same hardware as depicted in those videos. If your AN system looks something like the one showed on the photos attached, you can directly dismantle the display head alone, without opening the side arms/bolts. Bluetooth reconnection and factory rest/memory clear to fix it: After installation, if your bluetooth module is not connected, just keep pressing Apps button and turn on and off the headlights. Press INIT and Yes, then, additionally if needed press Memory clear and click Yes. Restart the car and enjoy your touch screen and Bluetooth again.

Quedó como el original en Toyota Corolla 2016 y si se arreglo el problema del touchscreen en la parte de abajo.

Fast Delivery. Only thing to add is should show front and back on display. Fast easy install and worked great after flipping it around.

Excelente producto, me tomo alrededor de 30-45 minutos cambiarlo

Worked like a charm, recommend!