Specifications: Recommend to use the CNC model (NC.file/G-code file) to cut. Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal) Wavelength: 450nm Input power: approx. 12V2A ≈ 20W (without fan power) Output optical power: 5.5W Image Format:.nc \ .dxf \ .bmp \ .jpg \ .png etc.. Image Size: 2000 * 2000 pixels / 0.075mm point distance Support System: WinXP / Win7 / Win8 / XP / Win10, Mac OS, android APP(neje scanner) Machine Supply Voltage: 12V3A Control line installation method: pluggable Focus range: 5-50mm Best focal length: 10mm from the light exit Engraving Area: 150mm x 150 mm in Working area; 160mm x 160mm in GRBL Mode Package List: 1 * Engraving Machine 1 * Protective Glasses 1 * USB Cable 1 * Power Adapter 1 * Wrench 1 * Whiteboard Marker 2 * Wood Block 5 * Paper 1 * Brush 1 * Metal tag 1 * User Manual Note: 1.Especially good at cutting, It can cut wood (3-8mm). It supports metal engraving including alumina oxide, and other non-reflective materials, depth of engraving (0.5-3mm wood). 2.Supported engraving materials: Wood, gray paper, leather, bamboo, blackening plastics, rubber, alumina oxide, etc. Can not work on the stainless steel, alloy, glass, and some reflective materials. 3.It is not possible to directly engrave the metal with strong mirror reflectivity, which may cause injury to the operator or burn the l-aser.  4.When the machine is working, it is recommended not to look directly at the l-aser head, and not to operate the l-aser head directly by hand. 5.L-aser diode is a sensitive component, pay attention to prevent electrostatic damage (product includes electrostatic protection design, but there is a certain probability of damage). 6.Need to switch to the CNC Mode to cutting.
TrustPilot
1天前
2 周前
