RP50390 RP44647 Hose Assembly for Delta Pull Down Pull Out Faucet with DST or Non-DST, Palo 470/472/474/476 Delta Faucet Replacement Hose Part RP62057 RP74608 RP32527, 59 inches Length

I purchased this hose due to a leak with the factory hose. Installation was not very hard as some of the reviews make it out to be. Yes, the coupling is different from the factory hose which makes is slightly harder to fish through the faucet assembly but I used a method that really worked well for me. How I installed it was to tie a 24" section of strong string to the coupling and apply a light coat of silicone grease to the coupling. I fed the free end of string through the faucet assembly which ended up exiting under the sink. I then reached under the sink and gently pulled on the string with one hand and gently pushed the hose through the faucet assembly with the other hand. The hose fed through the faucet assembly relatively easy though you may have to work it back and forth a little bit. There was a supplied "O" ring with the hose for the water inlet male side of the coupling. Be sure to install that ring before connecting the hose. I removed the old ring by gently prying it off with small knife then I installed the new ring by applying a little bit of grease and gently slipping it on. When installing the coupling, be sure to install the plastic lock that slips over the coupling and water inlet. Then install the sprayer wand part of the faucet, the weight on the hose underneath the sink, and you're in business. During assembly as I indicated I used silicone grease which is what I had on hand. You can probably use something like personal lubricant (KY Jelly) or baby oil and it should work. This hose seems to be very good quality and actually slides in and out of the faucet assembly smoother than the factory hose. Only time will tell as to it's longevity.

I was a bit hesitant at first to get because of the interchangeable piece (which it didn't look to b on the original oem) and the being a potential point of failure. But with the previous reviews, the price point of the OEM replacement in, and that this product uses more brass fittings than what looks to be plastic fittings on the OEM replacement, figure I would take the dive. And honestly, so far, I am happy I did. The packaging was fantastic. The quality of the product seems to be as good as if not better than the OEM. installation was, other than a flub on my part initially, straightford, simple, and easy. My hope is that it holds up in long term, but no complaints here as of now.

Works, wish it came with the clip

My original hose had begun deteriorating so I had black particles in the water from the faucet. This hose works well. The connections at both ends were much easier than I expected. The included O ring was appreciated. You do need to keep the clip from your old hose or buy a new one on amazon. I did have to work with the old hose removal and new hose installation. The faucet housing is full of hot and cold water supply lines, the housing is curved and the countertop hole is small. I found that just repeatedly working the old hose into different positions was finally successful for removal. For inserting the new hose, I found a small string helped me guide it through.

After looking everywhere for the hose for the retractile faucet handle of a Delta model prior to 2008, finally got it! I gave 5 * for easy to install, but be aware that the retractile part of the hose's connector that goes to the incoming water, doesn't retract in this hose making real hard to pass the hose through inside the spout to the incoming water connector. The solution is to pass a wire from the bottom of the sink and secure it to one of the two rectangular openings of the connector for the water inlet, and the pull the wire. Easy job! Exceptional value since it replace the broken one, don't have to get a new and remove and install, and in my case I have two separate sinks in my kitchen, and this way I was able to keep the style of my kitchen plumbing and soap dispenser. About durability; the time will tell... I just hope this people will keep more in stock, just in case.

Seems like a good quality replacement for the price. Brass fittings fit snugly. We had been getting black specks in our water that had gotten progressively worse over a few months time. Did some research and found out that the hose may be the culprit because I did not notice the black specks out of any other faucet. One tip is to undo the fitting under the sink first and then the hose should pull out from the top. If you try to pull the other fitting down it does not fit. I reused the plastic clip and weight that were already on the old hose. Had to run the water a bit to clean out the residual black specks but it looks clear now.

Our faucet was leaking and flooded the base cabinet. I researched the Delta hose and part number and chose Amazon vs actual OEM. Yes, I could've called Delta since they warranty for life. I needed a fast fix and not a week waiting for Delta to send me a new hose. Easy to install and works fine except when you swivel sprayer as you spray the areas of your sink the hose gets a kink in it. Never happened with the old metal style. It is lighter and less noisy, but a pain when we spray the sink and need to swivel the spray head around. I would prefer the metal over this.

Exactement ce qu’il faut, facile à installer et de bonne qualité.

It fit exactly like the original hose that come with the taps

Exactly what I need to replace the old one that was leaving black pieces in my water. I spent a previous day looking at five stores for a replacement think I was going to have to replace the whole faucet.

Prompt delivery of this part. Unfortunately it did not fit even though it was recommended by Delta as a possible replacement part for my faucet.

Parts are missing