Kitchen Faucet Head Replacement, G 1/2 or 13/16 Inch Male Thread, NSF/ANSI/CAN 61 & 372 Testing, Sink Faucet Sprayer Replacement Parts, Stream Spray and Pause Mode, Chrome

Awesome faucet head. Very easy to install and works great.

My Kraus shower head started spraying water everywhere. Kraus support replied quickly but no longer offered free parts, and shipping wasn’t free either. I found this replacement, received it the next day, and it fits perfectly! It looks like originaland works great. Installation took just two minutes. Excellent value and totally worth it!

I've only had this a few days but it works great & I love it! I bought the Shaco faucet with pull down sprayer also from Amazon. The faucet is great, but after 2 years the nozzle quit spraying a straight stream & the button quit working. I think part of it was due to limescale deposits on the nozzle. I searched to find a new head for the sprayer and came across this. I was skeptical because it was only $8 compared to many others that were 3x this much. It fit perfect, matches perfect & wow...is it powerful! The original sprayer that came with this faucet was not anywhere close to having a pressure this head does! It also has an additional button where you can stop the flow which is actually really nice when I'm filling up pots or jars on the counter. I attached two pictures of the new head. And one picture of my old head. The new one is slightly smaller... So I was not sure it was going to fit but it's perfect. I would recommend getting this. My daughter was excited out at how many bubbles we get in the sink now with the power of this thing!! Just be careful when you switch over from your old nozzle...I turned it on full blast & got a face full of water backsplash! It took me about three more times before I learned I don't need the water on as high...haha!!! So far so good! I would buy this one again if it gets clogged up with deposits again down the road.

I recently purchased this Kitchen Faucet Head Replacement, and overall, it’s a decent product. The price is quite reasonable, which is great if you’re looking for a budget-friendly option. While it’s not particularly fancy, the material is acceptable, and it functions as expected, giving you a reliable water flow for daily kitchen tasks. However, one important thing to note is that it doesn’t come with a gasket. This could be a problem if you don’t already have a spare one at home. So, if you’re planning to use this replacement, make sure to get a gasket separately or consider ordering a complete kit, which might cost a bit more but will ensure you have everything you need for installation. Despite this minor drawback, if you just need a simple replacement for your kitchen faucet head and you’re okay with getting the gasket separately, this product could be a good choice. It’s straightforward and does the job without breaking the bank.

Excellent product. It was a quick easy fix, requiring no tools. Unscrew the old one, screw in the new one and it worked flawlessly! I highly recommend this product.

This is an extremely light weight replacement head, of what I see as very inexpensive light duty parts. The dimensions and all were helpful, however it leads one to believe the internal coupling, if the threads match will mate, seal from the head to the hose - no. It looks like a proprietary coupling arrangement. The quite generic hose I have is the dimension it specifies, but in no was inserts into the smaller hole for which there is no washer supplied either. The outer, screw on, down coupling fits the stated thread ~ 20mm however, one has to nearly bottom out for it to pull the hose down onto the head and only at the top of that inside dimension. Had they simply made is "flat" as the others are, that flat generic hose would squash the flat washer up against it sooner than later and that would be that - done. I used the old flat washer, again of the inside dimension they say, but it's inside edge, for what ever proprietary male part this female receiver is made for - that inside edge is narrow. However, it seems, fortunately it all seals and it not leaking when "on", water flowing. Presumably since there is not back pressure and water flow on/off is controlled prior to this head which is just a flow device. In my opinion, they could easily otherwise include a stiff, substantial flat washer that would assuredly not squash down inside that "bevel" inside female receive part. (So complicated here and just not worth it for it's cost.) So, bottom line, while it not "tight" in it's being screwed onto, attached to the pipe, it does not leak. So, we think we're safe in "living" with it?, we hope. The one it replaces is far more substantial and yet, was just a generic replacement faucet, pull-down for this sink. I thought that was "cheaply" made - wow - having no idea there might be far lighter duty out there. I was not amiable to paying 3'x this parts price since would not be sure what that may buy me. So, for want of a heavy flat or "lipped" washer if even seems light duty - I just can't give it more than one star. I really feel regardless of all the above - it's still over priced for what it is - nearly Toy-like plastic that most would not consider for a primary Kitchen used many times a day by many people. I don't expect this to last a year, but, one can be surprised.

This is a perfect replacement for the faucet head on our Wewe kitchen sink faucet. Easy to switch out and water pressure seems even better than before. We were having issues with the previous head not switching from stream to spray without making a horrible squealing sound. Tried soaking in vinegar, no luck. This seemed easier and probably cheaper than trying to replace the springs or aerator which were the next options.

Definitely not the same as the original for my Bemis/BioBidet FlowMotion Activated sprayer. It doesn't have the notch that makes it stay in place, but that's not a big deal. The big deal is that the sprayer isn't as fine and as a result there really is no pressure in spray mode. The original was almost mist like creating great pressure. We'll live with it, but it could be a lot better.

embout fait parfaitement a 2 fonctions

Sirvió súper bien,mejor que la que tenía nuestra llave desde un principio

Great replacement for your old faucet head It comes with lots of accessories to match with different fittings size. Good Quality

Worst quality

This was the second replacement head I’ve purchased in the last year. The button on the first one stopped working to switch from stream to spray. This button is much more solid and makes an obvious click when you switch it from one setting to the other. The big issue for me is that the stream setting works well but the spray setting is so powerful that water splashes out of the sink and all over the countertop and backsplash. I hate complaining about the spray being too powerful, but it makes a mess all over the counter. I will like with it however because the head works well and seems well made, even better than the spray head that came with the tap.