A-SUB Waterslide Decal Paper for Inkjet Printers 20 Sheets Clear Water Slide Transfer Paper 8.5x11 in for DIY Tumbler, Mug, Glass Decals

This was my first time using this kind of decal and I found them to be pretty easy to use and effective. I followed the instructions and all of my projects turned out perfectly. Print quality was good and I had no issues with the ink drying. I bought this because my kids love Bluey (the animated show from Australia) so I wanted to make them some wooden Bluey coasters. I bought some 1/2 inch thick poplar stock from HD, cut it into 3.5 inch squares and sanded them smooth. I added a coat of acrylic clear and let that dry, then lightly sanded it so that the water would not raise the grain of the wood. I followed the instructions for these decals and printed them out on my Canon inkjet printer. I let them dry for about 10 minutes and then took the sheets outside and sprayed them with acrylic clear coat twice, with a few minutes between coats, as the can said. I did it again the next day for a total of 4 coats. I cut them out and the submerged one in filtered cool water. While it was submerged, I wiped a coaster with a bit of water. After 20-30 seconds, I took the decal out and placed it on the coaster and gently slid the decal off the paper a bit, then I grabbed the paper backing and slid it out while I held the decal in place. I adjusted it a bit and then smoothed it out and dabbed it lightly with a clean towel. I checked for bubbles and smoothed more with wet fingers, then I dried them again with a towel and let the whole thing dry overnight. The next day, I sprayed 2 coats of acrylic clear coat and the same again a day later. Then I added thin felt pads to the back to let them slide on the table. So far, they have held up well. The decals still look good and they aren't coming off. I did mess up one because I put on too thick a coat of acrylic by accident and it made the decal peel. One coaster was left with water on it overnight and there was no problem the next day when I wiped it off. Good coats of sealer are essential to seal the ink and the coaster, then the whole process seems to go well consistently. I had one or two decals in my second batch that ripped that were entirely my fault. You have to be gentle and I pulled too hard when repositioning the decal. For sure I will buy these again. They are great for small projects for personal use.

Just as described. Easy to use. As long as you let it dry, the ink won't spear. But I recommend spraying with clear acrylic spray prior to soaking. Doesn't smear easily. adheres quickly. Good quality paper.

This was my first time buying the ASub brand and I got to say I am happy I did. I love how easy they are to use compared to other brands.

Perfect for the project I needed it for, Valentines day roses will never be the same again

If you follow the instructions they go onto plastic like a dream. That being said expect to play with color settings a lot if you're doing anything other then blacks. Browns tend to bleach out and turn orange.

great item

I used this on a vase with a photo of roots. Looked pretty good and I am not crafty. Easy to work with but it did take me two tries as it was my first attempt. All in all a think it worked great. Would definitely recommend.

Facil de usar sige siempre las intrucsiones as tu diseño con tu computador o telefono en tu programa favorito de diseño despues mandalo imprimir en tu impresora de tinta recorta sumerge en agua y traslada tu diseño usando tus dedos o palita para sacar las burbujas que se encuentran dentro despues de aplicar siempre sige las intrucsiones busca tutorial para que no desperdicies tus hojas .muy buen material

Excelente

First time using this kind of decals, and it worked perfect. Had only one hiccup with it, but it was my mistake. One thing that one must be aware is, that once you spray the clear coat ensure you use the decal within an hour or two 😉, do not let it dry overnight. I made that mistake and it got ruined 😕. The clear coat had cured and when submerging the decal in the water, the image cracked (lines appeared). As for how long it will last. Can't tell as they were for Christmas presents. Will update if anything changes

Wow! I make resin products- keychains, ornaments, etc. My friend showed me how to use waterslide paper, and it was perfect for putting a picture on my creations. I purchased this brand, and couldn't be happier. It prints up nicely with my home inkjet printer. I just sprayed it with acrylic spray to seal it (a couple times), let it dry, then cut out the picture, soaked in water for about 30 secs, and slide it off the paper backing and onto my ornament, keychain, or whatever (she does cups). AMAZING!!

This waterslide paper did not disappoint. My images printed beautifully. After spaying the paper with acrylic sealer and letting it thoroughly dry, I applied the images to my mug without any difficulty. I will buy again.

Comes off paper fast when soaking