Will this cable go with sony camcorder dcr hc26? i need something that will enable me to transfer from my old school camcorder to my computer.

Hi there, Please see description I wrote below with regards to connecting a firewire device to a computer: So, there seems to be a lot of confusion about this cable and what it is capable of and a lot of disgruntled customers because they bought the cable without fully understanding those capabilities. I just wanted to chip in to give some advice. Firewire is an old old OLD technology and now pretty much obsolete. USB continues to be used across the board. This means that USB continues to be supported while Firewire is not. Firewire, or IEEE1394, to give it its official title, is a data transfer interface that was developed by Apple in the 1990s. This means that it has always been far better supported on Apple products than PCs. Firewire and USB transfer data in completely different ways making them incompatible technologies - a piece of hardware using firewire only cannot be read by USB only computers and vice-versa. Some pieces of technology are dual firewire and USB compatible. In order for your computer to read a firewire input it has to have a chipset that is capable of doing that or a firewire card. Almost all computers would have had one (or both) of these options 5 or ten years ago, but not any more, and I highly doubt that any PC manufacturers build firewire capability natively into their products any more. Why? Because it is an obsolete technology and almost nobody uses it nowadays. Apple may still, but I cannot find any information about this. Operating systems can still work with firewire so, if you have the right hardware set-up, you can still use firewire devices. If you do have an old camera, or anything else, with a firewire output, it is still possible to connect it to a new computer, but the cable may not be the correct tool to do that. The cable will only work if your computer is capable of reading a firewire input. I have an old desktop that has a busted firewire port, and I use the cable to connect a camera and it works fine, but that is because the chipset is capable of reading that input. If you have a computer that does not have the ability to read a firewire input then you need to search for an alternative solution. This is not the cable's fault - the cable can only operate under a certain (and in this case, fairly limited) set of parameters. The alternative would be a firewire card. These are fairly inexpensive and easy to connect to a desktop, if you have an available slot. If you are looking for a laptop solution, I believe (but I am not an expert in this, so you would need to research further) that you could do it through a firewire card and an express card to USB adapter, which would be a fairly inexpensive option BUT, again, I am not an expert in this, so you would need to research further to confirm this is possible. I hope this is of some help!

Will this work for sony dcr-trv 20 (= dcr-trv 6: dcr-trv 11)? for cam to computer xfer.

USB Male to Firewire IEEE 1394 4 Pin Male iLink Adapter Cord Cable Only Work for SONY DCR-TRV75E DV Cannot work for other 1394 or usb device. Length: 100cm Supports IEEE 1394 transfer rates of 100/200/400 Mbits Fully Firewire and iLINK compatible Molded strain relief enhances durability of cable against stress Connector: 1 side is 1394 4 pin male. The other side is USB male

this cable works for hadycam sony 8mm?

Really to be honest..this cable is useless..unless you have a super old computer.ive brought this cable made 3 different ways and my cameras will not link to my computer at all!! But I have a old laptop(2001) and it works..go fish

Desertcart Logo

交付 Hong Kong

获得最佳体验获取应用程序

下载应用程序

我们从

阿联酋
英国
印度
美国
日本
KOREA

客户服务

关于我们

客户支持

描述

🔗 Connect with Confidence!

BUILT TO LAST - Molded strain relief design enhances durability against wear and tear.
PLUG AND PLAY - No hassle setup—just connect and start transferring your data!
OPTIMIZED FOR SONY - Tailored specifically for SONY DCR-TRV75E, ensuring perfect compatibility.
HIGH SPEED TRANSFERS - Enjoy lightning-fast transfer rates of up to 400 Mbits.
SEAMLESS CONNECTIVITY - Experience effortless data transfer with this USB to Firewire adapter.

The chenyangCY 100cm USB Male to Firewire IEEE 1394 4Pin Male iLink Adapter Cord Cable is designed specifically for the SONY DCR-TRV75E DV, offering a reliable and high-speed connection for your data transfer needs. With a length of 100cm and support for transfer rates of 100/200/400 Mbits, this cable ensures seamless connectivity and durability, making it an essential accessory for your video equipment.

规格

Brand	chenyang
Connector Type	Usb, 1394, Firewire
Cable Type	USB
Compatible Devices	Firewire
Special Feature	USB
Compatible Phone Models	only for dcr-trv75e DV
Recommended Uses For Product	for DCR-TRV75E DV 1m USB
Color	Silver
Connector Gender	Male-to-Male
Data Transfer Rate	400 MHz
Shape	Round
Number of Pins	4
Unit Count	1.0 Count
Connectivity Technology	USB
Specification Met	IEC, IEEE
Headphones Jack	Usb
Indoor/Outdoor Usage	Outdoor, Indoor
Number of Items	1
Item model number	FW-037-CY
Item Weight	1.44 ounces
Product Dimensions	3.94 x 3.94 x 0.39 inches
Item Dimensions LxWxH	3.94 x 3.94 x 0.39 inches
Voltage	1.5 Volts
Manufacturer	CY
ASIN	B00VHUME42
Country of Origin	China
Is Discontinued By Manufacturer	No
Date First Available	April 1, 2015