ELECROW 5-Inch Resistive Touch Screen TFT LCD Display, 800x480 HD Resolution, Compatible with Raspberry Pi 5/4/3/2B/Zero, Banana Pi, Jetson Nano, Windows 11/10/8/7

Hardest part was figuring out how to mount it. It is very plug and play for a second monitor inside your pc case. I had to mount mine portrait for time being. Its perfect though for my weyland yutani pc theme. Just be sure to have a micro usb cable to a molex usb mobo connector for it or at very least have a usb mobo adapter with a 9 pin male molex plug in. Then get a micro usb to 9 pin female molex cable. Theyre like 5-7.00 prime on here. Get a short hdmi cable as well to run to your gpu. That should be all you need. If you want to mount it you do need to get a backing of some sort to bolt flush to the case inside. Only snag I hit but besides that its perfect.

I recently purchased the Elecrow 5” touchscreen, intrigued by its compact size and compatibility promises with Raspberry Pi devices. Here’s my detailed experience with it:Performance & Usability:The touchscreen generally performs well, providing a crisp and bright display that enhances my projects' interactivity. The screen resolution is commendable, delivering clear and vibrant visuals, which is a plus for anyone looking to add a display to their Raspberry Pi.Power Requirements:However, it’s important to note that this screen requires additional power to function optimally. It isn’t a simple plug-and-play solution with the Raspberry Pi, as one might expect. This means you’ll need to plan for an additional power source or a more robust setup than initially anticipated, which could be a slight inconvenience for those expecting a straightforward setup.Connectivity & Integration:Setting up the screen wasn’t entirely seamless. While it’s marketed as compatible with Raspberry Pi, the lack of plug-and-play functionality means you'll spend extra time on installation and possibly troubleshooting. This aspect could be improved for a better user experience.Screen Performance:The screen's brightness is impressive, offering clear visibility in various lighting conditions. However, I’ve noticed intermittent lagging, which might not affect all users but is worth mentioning for those who require consistent, real-time responsiveness.Overall Experience:Despite these challenges, the Elecrow 5” touchscreen is a solid choice for hobbyists and developers looking to enhance their Raspberry Pi projects. The extra effort in setup and power arrangements is a small trade-off for the screen’s overall quality and performance.Recommendation:I recommend this product with the caveat of the mentioned issues. It’s suitable for users who are prepared to handle the extra steps for power and those who can tolerate occasional screen lags. If you’re looking for an affordable, bright, and generally reliable touchscreen for your Raspberry Pi, this is a worthy option, provided you’re ready to tackle its quirks.

This screen is a great little device. It is bright and crisp. The touchscreen works well. Installing it took me quite a few tries though, so I thought I would post my findings to help someone else.I have have only tested this on a Raspberry Pi 3 running Debian Jessie, but it may work on other versions and flavors.Strong recommendation: Do not bother downloading the so-called "driver" noted in various places. The version for Debian Jessie is really just a script that copies configuration files (that seem to have some errors) into your /etc/ directories that brick your device. Happily, there is no need to do this, you can easily modify the files yourself.Prior to connecting the new display, do the following:The only software you need is for the touchscreen. You can get this with "sudo apt-get install xinput-calibrator"Then edit /boot/config.txt to add the following lines:----------------------------------------------------------------------------------hdmi_group=2hdmi_mode=1hdmi_mode=87hdmi_cvt 800 400 60 6 0 0 0dtparam=spi=ondtparam=i2c_arm=ondtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900 <======Note this is all on 1 line!dtoverlay=w1-gpio-pullup,gpiopin=4,extpullup=1----------------------------------------------------------------------------------Shutdown the pi, and connect the display. When you power it back up, you should have a perfect display. You can now calibrate the touchscreen by running Menu-->Preferences-->Calibrate Touchscreen. Click each of the four targets when requested and then you will get a text window which explains what you should put into a calibration file. For the Pi, the filename should be /usr/share/X11/xorg.conf.d/99-calibration.conf.And presto, you are done. I bricked my Pi 4 times getting this figured out...it is silly how easy it is once you know what needs to be done.Good luck!