Replacement Folding Keyless Entry Remote Control Key Fob Case For Chevrolet Camaro Cruze Chevy Equinox Sonic Terrain Key Fob No Chip

Fits perfectly, look like a bought a new car!

This a good value, and works fine, but you will either need to have the new key blade cut at a dealer, or you'll need to replace the blade with your old one. The parts that make up the pivot that the blade swings on are slightly different. I saw a review on here that recommended using a pick to drive out the roll pin to swap the key blade. DO NOT USE A PICK. A pick is tapered like a wedge and when you try to drive the pin out it will very likely break the cast metal pivot. I ordered 2 of these fobs and destroyed the first one this way. I found that an 18 gauge brad (nail) was the perfect size. A brad is also tapered on the end, so I clipped the tip off with a pair of wire cutters and filed it flat on the end. A light tap from a small hammer easily popped the roll pin out of both the original key and the replacement. Lay the pivot/blade assembly on a block of wood with a hole drilled in it so the roll pin is over the hole. Drive the pin out with the modified brad held with a pair of needle nose plyers and it will drop right in the hole instead of flying off somewhere. Off to order a replacement fob for the one that was destroyed by trying the pick method

c'était exactement ce dont j'avais besoin

Good key casing, I recommend it.

It’s an okay cover if you need something asap but not for long term. Parts don’t fit with old cover parts so everything needed to be replaced and was unnecessarily hard to assemble. I watched YouTube videos of other people replacing their covers and they replaced parts with ease but this cover made it extremely difficult. And to top it off my key does not even flip open, I have to force it out myself every time. Double checked to make sure everything fit correctly and it did, don’t know why key doesn’t flip open. Recommend finding one on eBay or directly from chevy.

Awesome fits 2012 Chevy sonic