BOG DeathGrip Realtree Excape Camo Tripod with Durable Aluminum Frame, Lightweight, Stable Design, Bubble Level, Adjustable Legs, and Hands-Free Operation for Hunting, Shooting, and Outdoors

I've had a few weeks to play with mine now, and I'm done looking for anything better. This thing is more than solid enough for varmint-caliber rifles. Some have complained that the parallel sides of the clamp don't hold the rounded contours of their rifles well. This is easily overcome with the application of some adhesive neoprene sheet cut to fit the saddle's gripping/contact surfaces, or even just a piece of thin foam rubber nested between saddle and stock.Mine arrived with a head that wouldn't pan easily and exhibited a ratcheting sensation when forced to turn side-to-side; a quick email to BOG Products yielded a suggested adjustment within 24 hours that handily solved the issue.This is made/sold by Battenfeld Technologies, Inc., which is part of Larry Potterfield's commercial empire along with Frankfort Arsenal (reloading tools), Wheeler Engineering (gunsmithing tools), Caldwell (rests, chronographs, adaptors) and a few others - and its availability through Amazon made it a bit easier for my wife to find in my Wish List than through Mr. Potterfield's "MidwayUSA" gateway.I wanted a tripod that would work for any position: bench, seated, kneeling, from a ground blind, leaning back against my truck... and this one even flattens down far enough to be usable in the prone position, depending upon what angles the ground takes between my position and my target. The rubber feet screw up around the threaded, pointed shafts on which they are mounted to expose steel pointed tips which worked great when I had to set up on a frozen puddle in a meadow.My alternative plan was to use a surveyor's level tripod with a 5/8-11 to 1/4-20 head adaptor, a separate ball head with ARCA-Swiss attachment, and a saddle clamp from another manufacturer, which would have given me a tripod that wouldn't go short enough for sitting, nor kneeling facing a downhill slope, and certainly not prone shooting, and I'd have still spent more even with cheap imported parts.I took a 6" long piece of oak 2" x 4" (true dimension) lumber and screwed in a stud that was lag-threaded on one end and 1/4-20 on the other, which I can clamp into the saddle and attach a small $20 ball head to use this tripod for binoculars, spotting scope, camera, or a light chronograph. I screwed another chunk of 2"x4" edge-wise to a 16" x 20" x 1" deep baking pan, sprayed the whole thing with a can of cheap truck bed liner, and now I can clamp that in as well for a hasty small table that stuff won't roll off of. I can raise the whole thing to maximum height and clamp in a length of aluminum/steel/PVC tubing, attach a seine net to the tube with zip ties, and have a "wall" to catch brass positioned to my right at the range. (Gathering the bottom of the net into a 5 gallon bucket collects all of my brass without having to attach anything to the rifle itself, or take up space on the bench.)My wife wants me to get another one so we can run a pipe or 2"x4" across them with hooks on it to hold camp cookware & utensils, drying shoes, or a tarp to create a wind break or rain shelter for gear. It holds a rechargeable LED work light nicely after the sun sets and I pack up my blind from a session of varminting.The only thing I'd like to see added is a hook on the bottom of the center for hanging my day pack, but a few loops of para cord around the legs ought to give me an adequate connecting point for the carabiner I keep on my pack's top handle. And when I get home, it makes a nice hanging rack for wet gear out in the garage.At this price point, I'm not afraid to molest it with some para cord, tape, and/or spray paint to "customize" it for specific passing needs; but the basic design and quality is just perfect out of the box, and I wouldn't ask the manufacturer to change anything that would increase its price.

My boyfriend loved it !

This is a very sturdy device. Just what I needed.

This is a nice tripod that's a good balance between rock solid and lightweight, and the camo finish looks great. I use a lightweight monopod for using in the field, and I use a heavyweight tripod for long range. This one nicely fills the gap in between those two. (and absolutely don't post a picture of this tripod with a gon in it, although this is it's intended use, this politically correct D.E.I. site won't allow it)

Great product would recommend for anyone that's wants a stable shooting platform also a bite heavier than I expected.

Absolutely love this!!! 100% helps with accuracy. Had mine stolen and immediately ordered a new one.

I use this for hog and coyote hunting and it’s awesome. I’m able to keep my hands warm while running my call but still having the gun ready. The only thing I could ask for extra on it is a good way to attach a sling for hiking to the next stand

This tripod is a beast! Steady while shooting, it hasn’t never failed me yet! Great purchase!