How to replace the battery?

On the panel where the dial is on the front of the door, that panel will pop off, you need to insert the end of a screewdriver to help you, you will then see the battery, a nine volt. When replaced you just pop the cover back on. Hope this helps. Merry Christmas, Sue

Do you get collars with the magnets?

You don't get a collar with the magnet. The magnet goes on a regular collar.

Will this fit standard INTERIOR doors? Hoping this particular door will help in reducing sound from leaving a room when it is closed.

yes it will fit a stander interior door. it has a solid plastic door that should keep the sound in the room as the magnet keeps the door closed accept when our cat comes in thru it. We have had ours many years and finally had to replace it and was very happy with the new type of magnet for the our cat to wear,smaller and lighter

Can I set this door to work like an ordinary cat door? It only works when everything lines up perfectly. That rarely happens.

If the electromagnetic catch does not appear to function correctly please check the following: a.The collar is attached in the correct orientation, with the magnet’s arrow and label facing forwards b. Place the cat’s collar around four fingers of your hand, so that the magnet is approximately 75mm - 100mm (3 - 4”) back from your fingertips. Move towards the flap with the bottom of the magnet level with the detector. When the magnet is within about 40mm (11⁄2”) of the detector the electromagnetic catch should be activated enabling you to push open the flap with your fingertips. If the electromagnetic catch operates correctly when tested as above, try to observe why the cat is not succeeding, e.g. is the cat not wearing its collar correctly? Is the cat flap installed at the correct height? etc. In the unlikely event of the electromagnetic catch assembly proving to be faulty please note that the catch assembly may be removed and returned for replacement (if within the 3 year warranty period), thus avoiding the need to remove the cat flap entirely. To do this, remove the battery cover and disconnect battery. Unscrew the two retaining screws for the catch assembly, then depress catch while pulling forward until assembly is fully removed. Replacement solenoid catch assemblies can be purchased at Pet-Mate.com if your warranty has expired. I have attached the link: http://pet-mate.com/us/product/solenoid-catch-assembly-electromagnetic-cat-flap/

Minimum compatible thickness	6E+1 Millimeters
Weight limit	50 Pounds
Frame material	Plastic and metal
Dog Breed Size	Medium
UPC	035368102547 786714490473 035368002540
Global Trade Identification Number	00035368002540
Pet Type	Cats
Product Dimensions	20.32 x 10.8 x 24.13 cm; 703.07 g
Item model number	254W
Pet Life Stage	all stages
Flavor	none
Allergen Information	Allergen-Free
Material Composition	100% mixed
Outer Material	Velvet
Inner Material	See description
Closure	Magnetic
Color	White
Number of Items	1
Quantity	1
Special Features	Durable, Easy to clean, Easy to use, Lightweight
Specific Uses	Outdoor
batteries required	Yes
Batteries Included	No
Item Weight	703 g

Electromagnetic Cat Flap - White

细节

描述

规格

评论

常见问题