Warning 1, The worktable to place the separator should be flat and the material must resists heat. 2, The plate surface and surrounding are very hot during work, please be careful when operating to avoid to be burnt and scalded. 3, Please pay attention to the safety of heated objects, heating element may be damaged because of high temperature. 4, Prohibit using the heating plate in the vicinity of flammable and combustible substances. 5, Before moving or touching the machine, please cut off the power and the temperature of heating plate recover to room temperature. 6, This machine is a high-temperature electroheat products, please remember to cut off the power when not using the machine to avoid danger and harm. Note 1, Must ensure that the machine is grounded well. 2, Do not let the air blow straight on the plate, otherwise it will affect the heating of the heater. Specification Voltage 110V Power 350W Temperature Range 0℃ - 400℃ Temperature Display 4 figures Temperature Stability ±1℃ 3, Operation 3.1 Temperature Setting Press “SET” when the SV/PV display normally to make the SV display flashing, find the figures required to set temperature by pressing “＜”button, set the temperature to the required value by pressing increase and reduce button, and press “SET” again to finish setting to let the machine switch to SV/PV normal display state. 3.2 Operation for Screen Separation 1, Adjust the distance between the clamps to make the rubber pressure column just press at the edge of the screen glass. 2, Turn on the power, set the temperature to a appropriate temperature, 80℃ recommended. Too high temperature will damage the screen. 3, After entering the constant temperature, fix the screen to be separated to the worktable. Please pay attention to that the hands should NOT touch the aluminum plate
TrustPilot
3 周前
1天前
