Proster RJ45 Crimp Tool Set - 3-in-1 RJ45 Crimping Tool Kit with 50 PCS CAT6 Pass Through Connectors 50 PCS RJ45 Cat6 Protection Covers RJ45 Pass Through Crimp Tool

i decided to take the plunge, for many years I had stuck with the old type of crimp tools, cutting wires carefully and feeding them through to the right length. no more, i thought so i bought one to give it a go, and it works well, thread your wires in slide the cablke up, crimp and cut the excess cables what could be simpler A+++++++

The clamping tool does an excellent job.Easy to use.Thanks good for the push throuh cat5e/6 ends as well it works like charm.

Good bit of kit.Works better than the lever type.Watch the safety catch.

A fantastic purchase, superb quality and easy terminating Cat5/6 ends

Excellent service and delivery. Perfect for the job

Used this when I ran an Ethernet cable from my house to the office at the bottom of the garden. Easy to use and good value for money. No complaints at all.

First off definatley throw the included RJ45 connectors in the bin! 100% fail rate!1 - Cut full cable - Works2 - Strip outer sheath - Works3 - Crimping - Works (not with the included RJ45 connectors)4 - Trimming the ends - Works for the most part, if you hold the tool closed you can wiggle the end wires offBoot covers are ok a little hard but functional, overall not a bad tool used with decent quality RJ45 connectors!

Ok where to start on this review.The plugs included seem to be fine as do the plastic boots. However, the actual equipment used for cutting of cat6 cable is absolute rubbish.I have tested on both solid core and stranded core cable. They do not cut cleanly through the cables just bending them and the worst part even when they do cut which is once every 20 times they leave a little piece of cable on the plugs so they do not cut precisely.And before those people that say I'm not using them correctly, you push the plug fully into the item and then cut it. It makes no difference.