Aeotec Recessor for MultiSensor and TriSensor – Discreet in-Wall Mount for a Seamless Smart Home Look

I like the ability to mount the sensor in the wall and make it less obvious. But the recessor isn't perfect... there is a slight paint difference between the white of the sensor and the white of the bracket, so it doesn't blend in as well as one might think. You can only tilt in one direction, e.g. up or down, but if you need to go side to side you have to turn the whole bracket, which might tear up the drywall either by the turning or by removing and reinserting several times to get the positioning correct. You also can't easily change the battery, you have to remove the full bracket and unscrew the sensor from it.It's also worth noting that while the recessor kit does its job well overall, the sensor being mounted on the ceiling will likely not work as advertised and will have mediocre results. But if your use case involves wall mounting and sensing at close range, such as a trip beam or motion that will pass directly in front of and next to the sensor, or monitoring a light source directly in front of the sensor, then it may work for you.

I used this to mount the motion detector in the ceiling. I have a couple detectors on the walls through out the house, and by far this is the nicest form of mourning. It’s flush with the ceiling (and or wall). My eyes aren’t immediately drawn too it like the other devices. I plan to replace other device with this over time. Definitely more appealing visually.

The design looks nice and it's a must to integrate a sensor seamlessly, but I'm disappointed with the build quality as mine cracked during the course of installing, presumably just from the force of bending the spring clips back. It's a small crack and you can't see it once installed, but still disappointing for a relatively expensive piece

Hopefully people will find this helpful. I saw comments and photos of what appears to be a previous model that had a yellowish ugly hue (no offense Aeon); because of this, I bought only 1 to see if they are still that color. Mine matched which was very important to me so I bought 5 more to be safe, all the same. Whole total I've now bought over 20 with 10 more on the way. Additionally, you'll need a 2 3/4 hole saw bit and drill in reverse for sheetrock to prevent jumping around or an unven cut. The spacing is perfect for getting the sensor in and out with ease, but won't leave a gap.

Pros- Flush design looks nice on garage ceiling- Perfect fit for the sensor it was designed for- Open back design great for allow cable access- Can be swiveled slightly for better alignment if needed- Mounting bolt attaches to sensor ensuring it will not drop from ceiling mount positionCons- Poor spring build qualityOn first attempt to bend back springs to fit into cutout and one sprint broke.My only saving grace is the cutout was precise and it was a great tension fit along with the 1 spring that did not break.The second sprint is not much better as far as being attached to the main unit.

Works with HomeSeer HomeTroller Zee w/Z-stick and SmartThings. I love the fact that one sensor can be used for so many things. Works as advertised so far. It will pick up motion quite a distance away which is great for large rooms and long hallways.

Works well and looks nice but it's priced higher than it should be. Then again, so is the Multisensor itself, but it's the only game in town until competitors come along.

This worked very well and arrived in good time as described. Slightly fiddly to fit, but now looks very neat on my upper landing, hardly noticeable.

Very easy to install and looks very professional

looks good, lets me hide the cord and avoid batteries

Livré avant la date prévu ! WOW super.

El producto es correcto, funciona bien, yo no he notado diferencias en el color, esta bien diseñado, vamos que no tengo pega con el producto en general, pero el precio es algo elevado para el trozo de plástico que es. Se agradecería si el fabricante vendiese el kit sensor + recessor aun precio inferior que si lo comprases por separado.

Die Halterung ist qualitativ gut gearbeitet, auch wenn sie ggf. noch etwas kleiner hätte sein können. Bei meinem Exemplar stimmte auch der Weiß-Ton mit dem Multisensor überein. Lediglich der Preis ist aus meiner Sicht etwas happig.