I am using a TB6600 at 2 amps and 36 volts and get over 1,000 rpm but have to use an acceleration curve as the motor won't go from a dead stop to that rpm without stalling.

下载应用程序

我们从

阿联酋
英国
印度
美国
日本

客户服务

关于我们

客户支持

Desert Online General Trading LLC

Dubai, United Arab Emirates

STEPPERONLINE

Q: What are the recomended volts and amps for max torque?

The torque in a stepper motor is proportional to the current. For the motor in question, the max current is shown as 2A. The winding resistance is given as 1.4 ohms per phase which works out the 2.8 Volts (2 amps x 1.4 ohms). However, this is not the end of the story. In order to achieve the 2 amp rating once the motor is in motion, requires a much higher supply voltage than 2.8 Volts. This is because once the motor moves, it generates a internal voltage that subtracts from the supply voltage. Additionally, the motor winding inductance prevents the current from rising immediately. To counteract these two forces, you need to apply a much higher voltage to the motor to force the current to the desired level. Using a modern stepper driver that provides adjustable current limiting makes this easy. The overdrive voltage needed will depend on the maximum voltage that the driver can handle, the insulation breakdown voltage of the stepper motor, and the desired speed you need reach. A good starting point is 10 X the value obtained by looking at the the winding resistance and maximum current ratings. In this case 2.8V (see above). That would imply that an overdrive voltage of 28V would be reasonable to use. If you chose this voltage, make sure the stepper driver can handle it. Also make sure your power supply can supply the current. You can back this value down as needed if you don't have to run a very high speeds. Hope this helps you out.

Q: Will this stepper motor work as a replacement for a soyo sy42sth47-1504a used in the lulzbot mini 3d printer?

Based on my review of the two sets of specs, my answer is, this motor will PROBABLY work as a replacement. The physical dimensions and the step angle are a match. This motor requires somewhat more current and has slightly more torque. Unless I missed an important detail, I believe that these motors will work.

Q: Is the 2A max/peak? What's an expected normal amperage?

2A is rated current, we recommend you drive this motor with rated current.

产品编号: 326497340

安全交易

细节

Brand
STEPPERONLINE
Speed
200 RPM
Voltage
12 Volts
Horsepower
1.4 Horsepower
Product dimensions
42W x 42H

📏Compact 48mm body

🔌1m cable with connector

⚙️59Ncm high torque

经常一起购买

STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-Lead W/ 1m Cable and Connector Compatible with 3D Printer/CNC

HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino

ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Ribbon Cables Kit Compatible with Arduino Projects

描述

⚡ Step up your build game with torque and precision that won’t quit!

PLUG AND PLAY READY - Pre-wired with color-coded leads (A+, A-, B+, B-) for quick, error-free installation in your next project.
EXTENDED CONNECTIVITY - Equipped with a 1-meter cable and 4-pin Harwin connector for seamless integration and flexible setups.
COMPACT DURABLE DESIGN - NEMA 17 standard frame with a sleek 48mm body fits perfectly in tight spaces without compromising strength.
POWERFUL PRECISION TORQUE - Delivering a robust 59Ncm (83.6oz.in) holding torque for flawless 3D printing and CNC control.
OPTIMIZED ELECTRICAL PERFORMANCE - Rated at 2.0A with 1.4Ω resistance, ensuring efficient and reliable bipolar stepper operation.

The STEPPERONLINE Nema 17 Stepper Motor is a high-torque, bipolar 2A motor designed for professional-grade 3D printers, CNC machines, and robotics. Featuring a compact 48mm body, 59Ncm holding torque, and a 1-meter cable with a 4-pin connector, it offers reliable, efficient performance and easy integration for advanced makers and engineers.

规格

Manufacturer	Generic
Part number	17HS19-2004S1
Item Weight	399 g
Product Dimensions	4.2 x 4.2 x 4.8 cm; 399.16 g
Item model number	17HS19-2004S
Size	1.65"x1.65"
Color	As Shown
Material	stainless steel(40%),copper wire(30%),plastics(20%),aluminium alloy(10%)
Voltage	12 Volts
Horsepower	1.4 Horsepower
Item Package Quantity	1
Speed	200 RPM
Batteries Included?	No
Batteries Required?	No

有问题吗？看看别人问了什么

What are the recomended volts and amps for max torque?

Will this stepper motor work as a replacement for a soyo sy42sth47-1504a used in the lulzbot mini 3d printer?

what is the rpm?

Is the 2A max/peak? What's an expected normal amperage?

常见问题

产品是真实而真实的吗？+

是的，所有产品均直接来自美国，英国，阿联酋和印度的授权零售商。我们保持严格的质量控制过程，并在运输前验证每种产品。所有项目都有适用的制造商保证，并由我们的标准退货政策涵盖。

交货需要多长时间，这是可靠的？+

送货时间因目的地国家 /地区不等，通常从3-9个工作日不等。每个订单都可以通过我们的系统完全跟踪。我们处理所有关闭范围，并使用可靠的快递合作伙伴进行最后一英里的交付。您将通过电子邮件和我们的应用程序定期收到有关您的订单状态的更新。

什么是凡人车？从安全订购安全吗？+

自2014年以来，落伍车是一个国际电子商务平台。我们每天在全球范围内安全地处理数千个订单。每个产品都会在交付前经过我们的质量验证过程，我们提供端到端订单跟踪，24/7客户支持以及全面的回报政策，以确保安全的购物体验。

产品定价如何计算？+

我们的价格包括产品成本，国际运输，进口关税，关税和当地交货费用。我们处理所有海关和导入程序，确保交货时没有隐藏的费用。 Pro会员将获得额外的福利，包括免费送货。

TrustPilot

TrustScore 4.5 | 7,300多个评论

全球购物，通过 Desertcart 享受优惠

物有所值

各种产品的价格具有竞争力

全球购物

为 100 多个国家的数百万购物者提供服务

增强保护

深受全球购物者喜爱的值得信赖的支付方式

客户保证

深受全球购物者喜爱的值得信赖的支付方式。

沙漠车应用程序

随时随地随时随地购物。

HK$390

关税和税费包括

Hong Kong店铺

免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

TrustPilot