NoLeafs Rain Gutter Guards for 4-6" Gutters. Micro Mesh DIY Install it yourself - 100 Feet

描述

NoLeafs is a 4 foot long section of 6.5" wide stainless steel micro mesh rain gutter guard. The NoLeafs Gutter Protection System consists of three main components: a front coated metal strip drip edge; a stainless steel 30 mesh screen; and an aluminum screen underneath. This type of gutter guard can be installed on various gutter types such as Ogee, half round, fascia, curved, box and many types of roofs such as asphalt shingle, wood shake, flat tile, Spanish tile and stone coated steel. NoLeafs is uniquely designed so that it simply slips under the roof shingles and rests on top of the roof-deck/water-barrier (tar paper) to clamp the gutter guard in place and stabilize its structure. The metal front is attached to the front top of the gutter via three self-tapping screws for each four foot section. The coating on the metal provides galvanic isolation to protect the rain gutter from corrosion. NoLeafs should be installed at the same pitch as the roof (up to a 15 degrees) to get the best performance of debris shedding off. NoLeafs is approximately 6.5" wide and should fit rain gutters less than 6". We recommend to get the sample first to make sure it fits properly. - Eliminates gutter cleaning forever - Easy installation Handles over 100 inches of hourly rainfall - Fits on existing rain gutters, no need to replace existing rain gutters - Barely visible from the ground - Fits on virtually any existing rain gutter and roof type - Keeps out wasps and other pests - Filtered water can also be used in rainwater harvesting - Will not degrade with exposure to the suns UV rays - Does not require replacement of existing gutters - Ships FedEX ground and shipping is included - Includes manual and 3 self tapping screws per section - No metal strip on the back edge, will not noticeably raise the edge of the roof material