YAX-RM-6001

Great lights, came packaged extremely well and also included all adapters and harnesses to easily connect to your Halogen or Factory LED truck. Manual was good with pictures but not great - Id suggest watching a Youtube on the install, its NOT nearly as bad as it seems if you are basic handy and have the right tools. I suggest to order with this if you don't have to make life easier: a good battery powered drill. A Socket Adapter kit (Allows you to use your drill with sockets) Small socket set (You need #10 and #8) (#8 wil a Hex head bit set (also good to have) A ratcheting wrench set (These are always good to have in your toolbox) Retainer Clip pulling set (VERY important) some 12" Zip Ties Small Knife/Box cutter Optional: LED fog light bulb replacements 6500k (H11) The longest part of the install, will be getting the side fenders off, no joke its 1 BOLT under there that is tight and tough to get off but if you have a ratchet wrench you will get it off.. Also make sure to notate where the bolts go - SUPER easy to confuse where they go.. Including the retainer clips - there will be 20+, Also, the fuse install, you will put the fuse into slot 38 The manual makes it hard to see and doesn't say which one. 38 will be in the middle of a BROWN 5 and BLUE 15 - should only be one in the box like that only. When your done installing the harness you will need to cut your fuze box cover just enough to let the cord out, otherwise it won't lock down. (Don't worry, you can't see it when you do and its down and locked) Also FYI - the SIDE marker light plugs (Small grey) will NOT be used for halogen trucks - Just zip tie it into place so its not loose. One other recommendation - Change out your fog light bulbs if equipped while your down there, get a good set of 6500k H11/H16 (Verify fit) bulbs and swap them so they match the headlight colors and your already down there so might as well just swap em! All in all - Looks amazing, not too bad install and I love em! Go for the tail lights as well if you can (Match the look) they work synchronously and look amazing and take 5 mins a side to put in.

I installed this product today and was left disappointed. The passenger side light fixture was defective, two of the lights do not work! I tested the passenger side light on the driver side. And yup! The lights do not work. Install was easy, was still a good amount of time, out of my day. I sent an email out to the seller. They look great but it would be nice if I got a working light. One star for me until this gets corrected

Installed perfect as listed. Watched a U Tube video and was simple to follow. Hope they last because they look good and seem to be good quality. Wire connections all clipped in snug and worked on first try. I have tried other after market head light kits and that wasn’t the case. Did not have to mess with the lighting angles adjustment at all. Very bright. Cool turn singles

Installed lights and verified they worked before putting it all back together. They look really sharp and bright. Went for a short drive and found drivers side low beams not working. Messed with the connector and found when touching or slightly squeezing the connector on the light side the low beam would blink on and off. I was unable to get the light stay on. Contacted the manufacturer - no response yet. Update - the manufacturer did reach out, but Amazon Support had already cross shipped a new set of headlights. I replaced them and the new lights are working great. They are very bright and look really nice. Hope they last.

Couldn't find a install video for Vland lights. Had to use a competitors video to disassemble the front of my vehicle. Other than that the install went pretty well. The lights look better than the factory option lights. The DRL's are much brighter than the factory ones. The sequential turn signals are awesome. The over all look makes my truck look amazing. I am overly pleased with the purchase of these lights. We'll have to see how they hold up.

I gave these lights 3 weeks of use before writing this, but they still havent quite met my expectations. The good and the bad: Theyre attractive, much better appearance than the OEM halogens. The sequential turn signals are nice. The DRL feature is nice. The bad: Irregular beam pattern High and low beam dont seem to be aligned properly within the housing. What I have ran in to is that the low beams are too low, and working through the adjustments I simply cant get them up to where they need to be. The high beams are too high, and when they are on there is a signifigant dead spot on the road between the two. I have seen the images and videos of these lights posted by other Ram owners, and mine do not have the same beam pattern as the others I have seen. I either got an odd set or the quality control is just that bad. I dont know if its worth removing these and sending them back or not, they arent great, but at least its a whiter light and I dont have any problems with blinding oncoming traffic, I just wish I could bridge the gap between the high and low beam light pattern, this would make them far more usable.

Great quality led headlights, extremely bright at a great price, easy install but after one month had moisture in one light and started flickering.

Giving it 5 stars because they are super cool once installed. I installed them with relatively basic tools and a snip from YouTube but it is not the smoothest. Totally worth it though

Easier to replace the entire headlights then change the bulbs. 2-3 months in and everything still works great. High beams do leave a bit to be desired but I run aux lights so not too concerned.