Double Sliding Barn Door Hardware Kit Top Mount Design 11 Ft. Track Included - Made in USA

描述

This Double Sliding Barn Door top mount style hardware kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Four Top Mount hangers with 3" cast iron wheel - Hanger Length is 6-1/4" total and 3-5/8" from wheel groove to end of hanger. The Hanger is 5" wide by 1-1/4" deep by 3/16" thick at the base and 1.5" wide by 3/16" thick where the wheel attaches; 11 foot length track (overall length is 11'4" to accommodate end bumpers) of 1.5" wide x 3/16" thick steel track; 1-5/8" length spacers that hold the track off the wall; Washers that go between the spacers and the wall; 5/16" x 4.5" Lag bolts to attach the track to the wall; 5/16" x 1-1/2" lag bolts to attach the hangers to the door; Two 2" x 2" angle iron end stops; 2 safety anti-jump clips to prevent possible derailment and bolts to attach; Floor mounted door guide fits doors up to 1-7/8" width or can be used with a 1/8" mortise or kerf cut on the bottom of the door (for wider door guides, please contact us). *Track will come in two pieces with splice kit included **The track is not predrilled to allow you to drill holes at the necessary locations. ***Hardware works with doors of 1-1/4" to 2-1/4" thickness. Installation instructions will be included and other helpful hints can be found online.