Ship Faced Anchor in Glass Blue Rhinestone Transfer

描述

✿ FINEST QUALITY RHINESTONES ✿ 100% CLEAR CRYSTAL RHINESTONE We guarantee Highest Quality Machine Cut 100% Clear Crystal Rhinestones in all of our Rhinestone transfer designs Print on T-shirts, Tank Tops, Hoodies, Tote bags, Hats, Caps and Fabric etc. ☆ Temperature and Time Setting ☆ Rhinestone: Set Heat Press temperature to 330 degrees and timer to 10-12 seconds. Rhinestud: Set Heat Press temperature to 330 degrees and timer to 6-8 seconds. ☆ (HOUSEHOLD IRON INSTRUCTION) ☆ (It is always recommended to use a Heat Press machine for Rhinestone transfer to any fabric) Preheat iron to cotton setting 340 degrees. Carefully lift and separate the rhinestone clear sheet from the white sheet (stones should stick to the clear plastic sheet). If any stones have shifted out of place, carefully put them back into place using tweezers or any other tools. Place the transfer sheet, stone side down onto the fabric and press gently with your hand. If it is not in the desired position, lift and reposition. (DO NOT PULL the SHEET ON THE FABRIC AS STONES MAY SHIFT) Place the Hot Iron on it and apply steady pressure for 15 seconds (DO NOT MOVE IRON AROUND AS STONES MAY SHIFT). Place iron over other design area for another 15 seconds and repeat till entire design is pressed. Slowly peel the clear plastic sheet away from the fabric. If stones are not sticking, replace the plastic sheet back onto the shirt and re-iron again. ☆ WASHING INSTRUCTION ☆ Wash the garment inside out in cold delicate cycle and hanger dry.