Security Camera Mount Bracket, Dome Camera Mount Universal Camera Wall Mounting Bracket/IP Camera for CCTV Security Camera, L Type

Although this mount did not fit my camera exactly, it has enough spots to make it work and mount up. Good threading on the screws and good powder coating on the mount. Exactly what the customer wanted and easy to mount.

These work and look professional. I like them better than mounting the cameras directly to the home in case we change cameras the mounts can always stay. I painted mine black with outdoor spray paint and they look good.

The camera mount works but I recommend a few changes. First thing I didn't like was that the wall mounting plate was not attached to the gooseneck straight as seen in my first picture. The drawings in the product listing indicate that it should be straight. It took additional time to mount the unit correctly. In one of the reviews they mentioned that the screws rusted so I replaced all of the screws with stainless steel screws. The two screws that attach the gooseneck to the camera mounting box as seen in my second picture I used two stainless steel M5-8 screws. The three screws that are used around the camera mounting box I replaced with three stainless steel M4-12 screws. Also be sure to use some white caulk to seal up any openings. I ran the wire through the base plate so I applied duct tape on the cable opening on the gooseneck near the wall mounting plate and filled the hole with caulking. Where the gooseneck attaches to the camera mounting box (see my second picture) there is a gap where water can get in. after I adjusted the camera box and tightened the two screws, I caulked the gap between the gooseneck and the lower camera mounting box. One last issue I noticed after mounting my dome camera and attaching the bracket to the wall was that rain was rolling down the dome on the camera and tripping the motion sensor. A future modification will be adding an overhang rain shield to stop any rain from rolling down the camera dome. I'll also need to see what happens with snow before I install a shield. The camera I used was a JideTech P1 PLUS -5X-8MP PTZ. I had to drill two holes in the mounting plate to properly attach and align the camera.

The front panel of this cable box is so thin it feels like it could crack easily. But the real issue is the mounting holes one of them doesn’t line up with my camera at all, so I couldn’t install it correctly. It’s clearly a manufacturing defect or design flaw. For something that’s supposed to help organize and protect your setup, it’s pretty useless if it doesn’t even fit. Disappointed and returning.  

That's what I was looking for

I used for the Geovision EBD series and it worked beautifully!!! Be prepared to drill three tiny holes. Any installer can figure it out. This is built well and awesome for outdoor mounting to walls on buildings. Hides the wire, looks professional and gives a slightly better angle. Can’t beat this product!! Buy it and you will love it too. Yes you might have to drill a couple small holes to match the camera. Not a big deal at all! Sincerely, an installer in Atlanta, Ga.

Muy bueno, pero muy complicada la instalacion

Really disappointed with this box. The construction is pretty shoddy, and the material feels cheap. It’s also much smaller than it looked in the pictures — there’s barely enough room to manage the cables. Definitely not what I was expecting.

Buena opción para la camaras de domo y buen espacio para ocultar los cables, lo único es que la pintura viene muy ligera y con cualquier golpe pequeño se vota o raspa

Excellent!

Sturdy and holds the bullet camera well. The opened holes may let his bugs build nests...to be determined

Absolute garbage. Stem wouldn’t fit into top of unit that holds camera. Too much paint. Took forever to assemble. Buy elsewhere.

Worked well but bit cheap quality