Professional Grade Truck Bed Coating

Had some rust starting on my aftermarket Jeep bumper and running boards. I gave it a quick cleaning with a wire brush and shot it with this. To my surprise, it matches perfectly.

Along with The paint I ordered the grit. The two together stops slippage. Good paint and good grit.

I use this stuff all the time. It's the best of the 'bargain brand' rattle can bed liners that I've found. I've used it to spray ammo cans, workshop tables, desks, angle iron, and even a plastic project box. It works great in every case as long as you keep the tip clean and shake it well before using it.I have not used it for my truck bed... because I just don't think it would be durable enough. It's great as a toughened textured black spray paint, but I don't think it's robust enough to be a truck bed liner for any serious duty. That said, I don't think any of the rattle can bed liners I've tried live up to that requirement. If you want a truly durable bed liner, have one professionally sprayed. If you want something that will get you by and you're ok re-spraying every few years... this might fit the bill.It works great as a tough black spraypaint for other projects though. I always have some on hand.

Whatever you think you’ll need, double it. I used 14 cans of the Pro to do 2 layers on my truck bed (8FT) and I still came up a bit short. Had to order 3 more to finish the job.It’s easy to apply, but be sure to have a spray can of WD-40 to blow out the clogs on the paint nozzle. They clog quick. Probably 3-4 times per can.It dries quick, about 1 hour. You can also start your second coat within minutes but I waited 2 hours until it was less tacky.Definitely use a sander to rough up the existing paint and remove the rust.I spent more time prepping on the tailgate as it gets the most abuse. Even added a third coat.The rest of the bed has fixed equipment on it so hopefully not getting down to bare metal won’t do me wrong.Most important thing is to clean everything well so it’s not adhering to dust particles and whatever else was in your bed.

I’ll admit that I had my suspicions, but really, not bad. I bought this to line the inside of my CJ7 as it is a trail rig and we don’t want carpet. I had concerns as it is a liner, sprayed out of a can. We paid careful attention to prep with sanding and then cleaning everything to ensure the best possible bond. It went on easy and leveled out really well. It looks a lot better than either my husband or I anticipated. I can’t speak to durability yet as we are at hour 62 of the 72 hour cure. We shall see. Make sure you use it in a very well ventilated area, it is an incredibly strong odor.

I used this product on my car's bottom chassis and painted my new gas tank skid to prevent rust

This is a great price for the six pack and the product is excellent. The quality of the finish is directly related to how far you hold the can away from what your spraying. The tips clog fast, as soon as it does pull it off drop it in some acetone clean it out with some compressed air and maybe a needle. Repeat as necessary. After the first can I just kept swapping tips. I used this to a paint the bumpers on my car, after I sprayed it and let it sit dry to touch I over Sprayed it with Gloss black enamel rustoleum to even out the color and brighten it a little bit. Dont know how long it will last but it looks good right now.

good for touch ups