BONTECUniversal Table Desk Pedestal TV Stand Tabletop Screen for 22"-65" LCD/LED TVs-Securely Holds 50KG & Max.VESA 800x400mmRecycled Claim Standard Blended

It is very sturdy and easy to install..came with most of the screws needed at least for my TVs..A lot of place for adjustments as well.

As other reviews have mentioned, this does not quite fit the old Panasonic size of 660 x 320 but it is very easy to make it fit! My old Panny 42" plasma TV is still going strong but the original plastic pedestal stand was cracked. These are hard to find and expensive so I looked on Amazon for something that might be suitable instead and found this. My TV is a circa 2008 vintage TH-42PX80B just in case this is the same as yours and you are reading this to see if it will fit.I assembled the legs with no problems at all, the instructions are clear and everything is marked nicely. The little spanner supplied is pretty poor quality and will bend if you tighten the nuts and bolts too enthustiacally. The holes don't quite line up with the 320mm spacing on my TV but I simply opened up the top holes into ovals with a battery drill. You could also do this with a small round file. A selection of different screws were supplied - I used the M8 x 40mm which fitted my TV a treat.I had the choice of 3 different heights and I've initially set it up to be as high as possible. This gives a height of 145mm between the top of the TV unit and the bottom of the TV set - plenty of room for my Sky box and Blu-ray player. The space between the feet is about 640mm and they taper out slightly from back to front. If you want the screen lower then the lowest holes will leave a minimal gap between unit top and TV. The third height available is about halfway between these two.In summary, a good quality item, easy to assemble and feels sturdy enough when fitted. For £20 I am very pleased, Panasonic item is over £100 and even second hand stands were about £60.

Reasonably initutive to assemble (I used an imact driver instead of the spanner provided). Worth noting, though that L and R refer to the view from the back: the feet splay outwards if you mount as intended.All that said a robust piece of kit, which I have used to mount a wooden screen concealing wiring, modems etc. Works well.

Very good it's fit nice in my tv

Cheaply made parts and screws, however it stays together, the looks are fairly cheap, but it’s very inexpensive stands very high. Easy to install comes with a variety of screws to fit every tv, will fit any tv size the extensions are huge

These were a quick fix for a new large screen that did not fit on our TV unit that will eventually be hung on the wall, easy to put together but felt a bit flimsy when attaching to TV, but worked extremely well and surprisingly stable and worked well with a 70 screen although states only up to 65 inch and also good value and quick delivery.

Perfect stands for my tv! They fit perfectly and holds the TV up very nicely. This is the best you can get! Easy to install and great value for the money!

It is sturdy.