NF-A15 PWM

Never bought Noctua before and sure enough they are as good as everyone has said. High quality and quite. I bought this Case Fan as a suppliment to the D-15 cooler (which comes with two of these fans). I have two fans pulling air inside the case from the front and one in the middle of the dual radiators cooling block, all fans on one CPU fan header for one point of control depending on the CPU temperature, all fans working together. No need for the in-line lower-RPM adapters, I took them all off and decided that the fan curves that I set, should decide if the fans go to full speed if needs be on the rare occasion the CPU goes over 95 (its an intel 8 core at 4.5). Brilliant.

Easy to install used a second fan to support their threadripper cooler. Mounted in Fractal case it is as quiet and efficient as one can ask for. Well pleased. Contacted their tecnical to to confirm the cooler would be fine on Threadripper 3rd generation good speedy response.

Bought this because my PC build was running a but too warm. Adding this fan to the case to exhaust the heat lowered the CPU temperature by about 10°C

One of my bug bears is paying a premium price and not getting any customer services. I emailed them as one of the fans was damaged, The fan itself is a beast. This is a lot bigger than I expected and just about fits in my mid tower. 2 of the memory slots can be used on used but the other 2 on the atx board maybe too close to the fan. The fan at the front I fitted further to the right so it’s not near the ram. The fan slso,make it difficult to uncoil your graphics card as it’s hard to get to the clip. One of my m2 slots has been taken away from me also. Cooling wise this is brilliant and seems to keep my amd 7900x3d cool. The maximum the processor has reached is 76c and the processor is known to give out loads of heat. The fan is quiet and has no vibration and is really good quality. This would have had 4 stars as the fan is large and I think more suited to an e-atx. Edit: I broke a fan by fitting it the wrong way. Noctua were a little slow getting back to me. They are replacing the fan as a gesture of goodwill. Great customer services.

Having a Ryzen 9 5950x with average temp of 80c-85c I needed to prepare for the heat to come so I got 3 Probably the best quality and best performance fans . Not the best looking but it does the job very well . Also you get some extras in the box

I bought this fourteen months ago and have never had a problem with it, I bought this at the same time as the NH-U14S Ultra-Quiet Slim CPU Cooler with NF-A15 Fan to make it a push-pull set-up. These are great fans powerful, quiet, six year warrancy, and brown which I quite like. Certainly makes them stand out. This also comes with a low noise adapter to further decrease the revs and further reduce any noise you may hear. I have been using Noctua gear for years now because I like good gear and I think these are the best air coolers/fans on the market. Recommend.

Bought this to use it as chassis fan on Silverstone FT03 Mini to replace the Air Penetrator fan that it came with it (because of noise). Its definitely one of the quietest fan I have ever used and the pressure of wind is quiet impressive too. However it does not have the distance (or penetration!) as Air penetrator does so I feel less wind coming out of the case at the top with NF-A15. (FT03-Mini only has exhaust at the top of the case) But because its rather packed inside the effect of the chassis fan is rather limited so it does not effect the cooling so much. Besides because there isn't much of noise I can keep it on at 60% duty cycle even at low temperature so that I can continually keep my components cool and thus, hopefully, extend its life.

this was bought for the front intake on my zalman z11 case but sadly does not fit so had to use as a bottom intake. this fan just oozes quality from the minute you touch it you know noctua have designed these with perfection in mind. even at low rpm this fan pushes a lot of air, and at max rpm is the quietest fan in my case. my gentle typhoon makes more noise. amazing product just make sure it will fit as the dimensions are 140x150.

even at max speed this fan does not make too too much noise, but very good at moving air.. new iteration from this company is coming soon, I will be interested to see more about it.

Queste Noctua NF-A15 PWM sono l'eccellenza della dissipazione ad Aria: alta compatibilità, silenziosissime e con un flusso d'aria mostruoso. Cara Noctua, quando mi farai i tuoi prodotti full white? :D

Tout est dit dans le titre ! Excellente finition. Gros débit d'air permettant de le faire tourner à faible vitesse (PWM) pour avoir une silence royal tout en ayant assez de flux d'air. Roulements extrêmement durable : ce ventilo survivra à plusieurs configs , croyez moi, j'utilise des Noctua depuis presque 10 ans. Pas de coil whine, pas de bruit PWM, roulements silencieux étanches, que du bonheur ! A fond, évidemment il n'est pas silencieux mais le bruit n'est pas désagréable. Toutefois, ce n'est pas la philosophie... Le but d'un gros ventilo est qu'il tourne très lentement pour émettre le plus faible bruit possible. Pour moi le prix est justifié, car efficace et increvable, et livré avec tout les accessoires nécessaires ! Il est monté sur une RX 480 Nitro par dessus un radiateur Arctic Accelero Mono Plus. Association redoutable !

como en 18cm apenas hay alternativas de ventiladores de caja (los fractal pero tienen ruido de casquillo y funcionando en horizontal sufren) puse estos ventiladores de 15cm en montaje de 12cm, en una antigua caja silversone raven 02 (la MEJOR caja para refrigerar por aire, con permiso de la fractal torrent que también tengo) empiezan a girar a 300rpm hasta unas 1200rpm con control pwm. vienen accesorios de montaje (tornillos de goma) y diferentes tipos de cables (alargadores pwm, reductores de velocidad, o conexión de 2 ventiladores en 1) virtualmente son inaudibles a bajas RPM y con un buen flujo de aire (presión decente, aunque las nuevas versiones "empujan" más a través de radiadores y aletas de disipador) son un poco caros, pero ya sabes que te van a durar un montón y que NO VAS A ESCUCHARLOS

Ich habe mir den NF-A15 PWM als Ersatz für den NF-P14 auf meinem NH-C12P SE14 gekauft, da dieser nur per 3-Pin angeschlossen wird und auf meinem Mainboard nicht zuverlässig anläuft. Mit dem A15 läuft jetzt alles wie geschmiert. Ich hab' ihn wieder mit dem Low-Noise-Adapter laufen und so ist er für mich zu keiner Zeit wahrnehmbar (so wie vorher mit dem P14 auch schon). Der Preis ist zugegebenermaßen recht hoch im Vergleich zu anderen Lüftern, dafür bekommt man aber ein umfangreiches Zubehör (Verlängerung, 4 Schrauben, 4 Gummi-Aufhängungen, Low-Noise-Adapter, PWM Y-Kabel), immerhin 6 Jahre Garantie und - wer schon mal Kontakt mit Noctua hatte, kann das sicher bestätigen - einen sehr guten Service. Mir ist es das Wert. Einziger Kritikpunkt bleibt sicher weiterhin die Farbgebung, die nicht jedermann's Geschmack trifft.