ALM Manufacturing ALMMX002 Stroke Fuel Mixing Bottle - White

Does what it's meant to, very handy

Great product that appears made well from thick plastic. The process of filling up is a little tricky but doable without spillages as long as you use a funnel. I planned on using the measurements on the side for 50:1 but ended up over filling with oil so had to do 25:1. For first time use though it will take a little time to get to grips with that.I mixed it up and poured it into my mcculloch chainsaw and it started perfectly and run well given its an old machine. I will be happy with using this mixing bottle ongoing.No concerns with leaks or poor fitting lids, i experienced neither of those. As others mentioned, it would be good to have cleared markings.

This mixing bottle is adequate for mixing 1 ltr of 2 stroke fuel. The measuring marks are just stuck on, near the neck of the bottle and are subject to getting oil and petrol on it. It would be better if the measuring marks were 'moulded' into the top of the bottle, so that the marks would not be affected by petrol/oil.

Getting the correct mix of 2-stroke fuel is vitally important, and the last thing that you want is to damage expensive equipment because of a cheap mixing bottle. Thankfully this bottle has markings that are accurate enough that your mix should be safe.It's not hard to use, simply add petrol to the 1 litre mark, add 2-stroke oil to the desired mix mark, and shake.Does it leak? NODoes it mix a batch to the correct ratio? YESI have mixed a couple of litres with this, run it through the Japanese, precision engineered, internal combustion engine attached to my chainsaw - and the chainsaw ran beautifully. This chainsaw is very fussy with respect to oil ratios, a little too much oil and it smokes and hesitates on acceleration. This seemed to make a mix just right for my equipment so I am more than happy to recommend it.The only reservation I have is that the markings are printed rather than moulded, this implies they may wear off at some point, but so far there is no evidence of this.Pros- Doesn't leak- Accurate enough for my needs- Angled neck makes pouring out easyCons- Printed rather than moulded markings may not last- Angled necks make filling a little awkward - always use a funnel

I added petrol to the marker, then oil and mixed it. Literally everything I wanted in that statement. The beauty of the product was it resulted in a 2 stroke mixture that I put in my garden machinery. Sometimes simple is best

This bottle is made from sturdy plastic with easy to read measurements. Ideal for my chainsaw and strimmer. Happy with my purchase.

Well made.

This is a great mixing bottle. Well marked and perfect for filling my strimmer.