eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Black

I've been using eSun PLA for quite a few years. It's always been my go to filament.I've never tried the matte PLA filament though.Thus stuff prints absolutely amazing. It's so smooth and top quality as always.The picture I've posted is at the following settings.Bed temp-60C, Nozzle temp-205,Nozzle size-0.4mm, 0.24 layer, 450mm/s print speed, 5 walls. It's for a Dewalt Drill hanger(Hince the Black & Yellow Colors)Yellow is also eSun.I'm now ordering the PLA+ Rapid to try out. I've been 3D printing for years and have never had an issue with my eSun filament.I highly recommend eSun Filament.Super easy to print with, pops right off my PEI sheet, strong and it looks fantastic!

Great filament. Been using this to print out fossil and skeleton like prints on a Bambu P1S. I got the C-bone white but I don't think that's a good description of it. Fossil white might be a better description as it comes out with a dirtier hue than bone white. This is what I wanted though. I would definitely buy this again

I was surprised how inexpensive this filament was for the quality and print results. First the negative, the spool is wound poorly but I have had zero tangle issues which is all that maters. This filament prints great, sticks to build plate perfectly, does not ooze at all, color is beautiful fire engine red, what I mean is it has a very solid deep red color. No regrets and I will buy again.

Came in great packaging, was exactly what i ordered. Cant wait to print items with this quality product

eSun has been my go to brand so far, so my heart broke when I had my first critical failure. There was no signs of any cross threading when I opened the filament so I loaded it up and I did one really nice 4 hour print of some tombstone plant markers. I started my second round of plant markers, things were going very well, until I went to collect my finished print and found out the hard way that cross threading can be hidden deep in the spool. I never took this spool off the printer, otherwise I would just blame myself for carelessness, but this had to have happened at time of initial spooling at the manufacturer. Shit happens though, so I just asked for an exchange. I really do like this filament, and I’m excited to finish this garden graveyard!

I used this in the AMS attached to the Bambu P1S Printer and the results are better than expected, It printed this dragon Skull (makerworld 1213360) with no issues. very happy with the filaments color, it's a Bone but a little more yellow so it looks like the skull I printed is old. The only caveat is that the Spool is cardboard, You DO NOT want to put this in an AMS without printing Spool adaptor rings, these are the ones I printed (makerworld 37478) and it attached to the spool and worked perfectly. (I would suggest measuring the spool and making sure you print the correct size.) ESun is good product and will definitely buy more in the future.

Satisfied with it, but haven't compared to other filament brands.

Trying to at least get close to matching Festool's green, and I thought this was going to work. In the pic, the LCD frame and the V-slot covers are the E-Sun PLA+, and the knob is Anycubic's PETG "green"The e-Sun looks like a perfect match ON the spool, but the color after it's printed is disappointing, maybe 2-3 stars. It's just bland. It loses much of the sheen and richness of the color, and while it's the closest match I've found, in an easy-to-find amount, after printing, it's just an adequate fill-in that I will likely replace if/when I find a better color match.As for the filament performance, it's definitely 5 stars. This was the first filament I ever printed at the time, and nothing I've used since has been as easy to work with as this stuff.No clogs, easy extrusion at lower temps than expected (195c), and zero adhesion issues. I liked it enough that I tried 3 other colors, but none matched the easy performance of this stuff, in all areas.I wouldn't hesitate to buy this again, but hopefully this Pic will show you the color fairly well, as there doesn't seem to be many examples of how it looks in the wild.I wasn't able to use the PLA+ for the hotend shroud, but I was able to use this for fast and easy prototyping, and the PETG I tried, as shown by the knob, turned out to be much closer to what I was looking for, color-wise, but nowhere near as easy to work with as E-Sun's PLA+If the price is right for you, I'd definitely stock up on this for easy prototype jobs, but if the color is your main criteria, like it was for me at the time, I'd look elsewhere