HISPEEDIDO V5 Drop in Pre-laminated IPS 3.0 inch Highlight Mod Sets For GBA SP V5 Screen Replacements LCD Kits, HD Touch Control, NO SOLDER/NO TRIMMING Need

Freaking love this screen! No hard time in well light areas and completely dark areas. No dead pixels and can change the setting of the screen to however you desire it. With the screen being a lot better improvement wise the battery does get drained a little more quickly but not by very much so I’d recommend buying a better battery. I also wouldn’t say that it’s completely solderless since you have to solder the red wire to the flex ribbon to the motherboard if you want to use the brightness button but it is touchscreen to the point where you can change the brightness and color. Other than that I recommend getting this screen and been using it on my GBA ever since.

I was really expecting some snags or surprises in this "drop in" replacement, but up to the very end this was absolutely painless. This screen looks great and it is literally a plug and play replacement. At full brightness it looks like a modern handheld screen and is playable in any light. Only two caveats that you should be aware of going in: -if you are lazy (like me) and don't want to wire the screen button for on-screen controls, the brightness is controllable from a hidden touchspot on the bottom right of the screen bezel. It cycles up through 15 brightness settings. I couldn't figure this out at first and was worried about the screen brightness being inconsistent, but this little spot gives you all the control you really need. -It doesn't have backing foam for the screen (like the official ones have installed) but I recommend having a little bit of packing foam to insert for stability. It gives the thing a little shockproofing.

Super high quality and very easy to install. The difference compared to the original screen is huge. My only complaint is that the tri-wing screw driver that came with this kit was terrible. I ended up just using my own. I love how bright and colorful this screen is compared to the original.

!!!!! IMPORTANT INFO !!!!! please read Works great. Looks great. Had it installed for a week without soldering the extra control wires. Then one day it’s suddenly dark. No brightness. I took it apart and reset the ribbon cable. Still dark. What I discovered is that somehow there is touch sensitivity at the bottom right of this screen that controls the brightness levels. Now that being said you have need to solder the wire on if you want access to the control menu. Brightness can be controlled by tapping the bottom right of the screen. More info can be found on Reddit in regards to the touch sensitivity controls. Reviews and info on Amazon at the time of my purchase did not explain this at all. I thought I had a defective screen. Thankfully I did not.

Looks great and is so much brighter than the original. Does require soldering of one wire but if you don't do it the screen works great you just can't change the brightness (I haven't done it yet) but still works

So I've never done anything like this before. But this was so easy, I followed a tutorial and it looks great! Mine did not come with a wire to solder, but that's FINE! Because thanks to another review here I found out the screen has a secret touch space in the bottom right hand corner to change brightness! I upgraded an old AGS-001 and the screen was dim to the point where I couldn't really play it. Now I'm using my modded one all the time and I'm super proud of it! I will for sure be buying this again.

When I initially removed and replaced my GameBoy Advance SP screen with this screen, it had trouble detecting when something was touching the touch screen controls making the screen cycle through all the settings non-stop. However, this was easily fixed by soldering a wire as shown in the video on this product. Now with the brightness button, I turned off the touch screen and can manually adjust the screen's brightness, color effect, pixelization effect, and saturation with ease.

It's exactly as stated in the description. However, I will note that the soldering portion is optional. I have no soldering experience, let alone access to an iron; the touch screen works perfectly fine. Soldering is intended to be done if you wish to control the display with the original brightness button.

Es touch screen, viene con el cable para soldar pero NO es necesario, es fácil de poner si la carcasa no se tiene que modificar, buen producto y una buena opción como updgrade! Por cierto, si… tiene el nombre que no se puede poner en la pantalla por copyright hahaha

Exactly what I was expecting, it was an easy install and choose not to solder. I also swapped the shell and it turned out perfect!

Fits perfectly, looks amazing

Compared to the front-lit screen that came with my AGS-001 in 2002, this screen is incredible. Bright and colourful! I chose the non-solder approach and found the touch buttons to adjust brightness kind of finicky. I'll be doing the soldered approach the next time I have it apart (perhaps to upgrade to a cool transparent shell). This screen should be your first upgrade if you have an old AFS-001.

work great. As described. good product