JDiction Silicone Mold Making Kit, 2.32lb(37oz) Super Elastic Liquid Silicone Rubber Fast Cure Soft Mold Making for Casting Resin, Candle, Soap Molds

I've wanted to make silicone molds for years and always found the material to be too expensive. This seemed to be the right price. I've now created multiple molds with this material and have had no issues whatsoever. The molds came out bubble-free and were successful in casting plaster. For ease-of-use and to use less material, this is how I used this kit: 1. Place a container on a digital scale, zero-out (tare) the scale. 2. Pour part A into this container, take note of its weight. 3. Pour part B until the scale reads two-times what it did for Part A. 4. Stir slowly with the included popsicle stick. For a standard soup can, I would make one rotation in 4 or 5 seconds. While stirring, scrape the sides and touch the bottom of the mixing container periodically to ensure all material is incorporated into your mix. Don't remove the stirrer or go fast as it can incorporate bubbles. Finally, pour the silicone mixture very slowly into your mold box but not on the item itself. It is less likely for air bubbles to be trapped by pouring to the side of the item instead of onto it. I held my soup can around 2 feet high and allowed a very fine stream to flow into the box. The overall pouring time was between 3-5 minutes. I didn't use the included silicone measuring cups and feel it is unnecessary for what I'm doing, as well as a potential waste of material (material remains after you pour it, and this stuff comes with a premium). It was too cool outside here for proper curing (less than 70F), so I took a small space heater which measures about 6" tall, placed it in front of the mold, then laid a box over everything, with one side of the box resting on top of the heater. This allowed the temperature inside the box to get quite warm (80-85F - ish), and it cured no problem. Finally, I was able to pour plaster of Paris and cast my pieces which came out lovely. No bubbles in the final plaster product. Quite satisfied with the results and this product.

Perfect for projects Quick n Easy

Love how clear this epoxy is. It cures quickly as well. High quality product at a fair price.

It's a nice product. The only thing I don't like is it takes a very long time to cure, longer than what is says.

Works like they say it does. I made a mold of a frog and have cast about 30 in concrete from that mold. One of the easiest molds I have to use. Nice for drop molds not glove molds. Mold is ready quickly in comparison to latex and fiberglass.

So like, I saw someone mold an arm and hand so I wanted to mold an arm and hand. The way I did not do my research. This is not safe for skin. That’s what the thing said. The instructions are simple and have photos which I greatly appreciated. For sure the 37oz is great for small projects. I know the hand does not fit in the thingy. I originally had a large cylinder tube because I wanted to make a whole a** arm and hand to practice tattooing but obviously effed around and found out that 37 ounces of fun would not be it for me on this day. As you can see, no bubbles here. Because this is clear, cloudy clear, I did mix in Liquid Silicone Coloring Dye. I was trying to do this peaches and cream swirl. Ma’am. This is difficult. I had a good time though. Our take away: Great for small projects. Self rising bubbles. Not safe for skin. 10/10 would get gallons next time. Also, do research.

This product did not disappoint. It cures fast and no bubbles. It’s extremely flexible and easy to remove from the molds . It’s great quality and the value is definitely there for the price I will buy again next time.

I USUALLY BUY MOLDING PRODUCTS FROM DOUGLAS-STURGESS WHO HAS A WIDE VARIETY OF MATERIALS FOR THAT PURPOSE. I TRIED THIS BECAUSE I ONLY NEEDED A SMALL AMOUNT FOR A SINGULAR MOLD. JD SILICONE IS A 1:1 MIX BUT THEY DO RECOMMEND USING A GRAM SCALE TO MEASURE PRECISELY. AS SILICONES NEED TO BE PRECISELY MEASURED BY WEIGHT TO WORK APPROPRIATELY I WONDER WHY THEY SAY IT IS A 1:1 MIX ...MOST PEOPLE DO NOT HAVE A GRAM SCALE AT THEIR DISPOSAL. MY MOLD TOOK LONGER THAN ANTICIPATED TO SET BUT IT DID EVENTUALLY DO SO AND HAS MADE AN ACCEPTABLE MOLD.