Power Door Lock Actuator Passenger or Driver Side, Front or Rear, Replaces 22020256, 22062740, 22071947, 746-014 Compatible with Chevy, GMC, Buick, Pontiac, Oldsmobile & Other Models 1985-2005

Affordable, good quality materials, fit well and reasonably straightforward installation. Replaced the OE door lock actuator that had failed. Works well and is going strong. So far so good.

WORKED GREAT.

Replaced the power door lock actuator on the passenger door on my Chevy Astro. The original power actuator no longer had enough force to lock or unlock the door. This replacement unit fits and works perfectly. There is a small plastic tab on the replacement unit's electrical connection which I had to file off so it would fit in the socket. It only took a minute to remove. I used two short bolts instead of rivets to re-attach the new power actuator to the door. I had a bag of replacement plastic retainer clips for the door panel which I used previously to replace a few clips that were broken when removing the door panel. It took about an hour because I had all of the material to do the job.

Update: I finally received a warranty replacement. I have updated my review to four stars. —————- Installed without any issues but stopped working at about nine months. I communicated with the supplier for a warranty replacement, of which they were timely in their replies. However, their commitment to send a replacement has never been fulfilled. I was supposed to receive a replacement over a month ago, which never occurred. I would not consider this part/supplier due to poor quality and lack of customer service.

We needed this, because both front door lock solenoids on our Tahoe failed. We've been manually locking it, but it was tight. If I'm going to open the door to clean the latch, I may as well replace the solenoids. There are negative reviews about them not being strong enough. They are *very* strong. It's likely that the latch mechanism is gummed up. It needs to be cleaned and lubricated. It won't fix neglect in other parts. The lock rod should move easily. If it doesn't, fix the problem. You will need to flip the bracket around as appropriate for the side and placement. Our OEM solenoids had the bracket sticking down. Just pull the 4 7mm screws, put it in the appropriate alignment, and put them back. They do have a tab on the electrical connector that wasn't compatible with the OEM wiring harness. I just dremeled them off. It didn't come with screws. I used some 1/2" long #8 screws. It's hard to put them in, where you can't see the back. I put a nut on, to secure the screw to the bracket. When I put it in, all I had to do was add another nut and tighten it. There's room to play with the solenoids, so offsetting it 1/8" doesn't impact the performance. I'll order these again, when the lock solenoids fail in another 20 years.

Item work exactly as it should.

it came BROKEN and not working??? why wasn’t it checked before sent out

The fit is perfect. I gave it 3 stars because I purchased this item back in 2018 from the same company, it worked great for about 2 years and then it quit locking the door. I had the dealer ship replace it twice in the past they were defective. I think it's just a defect in the design.

Latch fit like a dream, awesome delivery time. I would recommend this part as it is as good as OEM.

the part was received and installled and works well

did not fit, could not return product as was past return deadline.