HICTOP Bambu Lab Hotend X1 Carbon Assembly with Removable Hardened Steel 0.4mm Nozzle Hotend for Bambu Lab X1 Series 3D Printers

Slipped straight in and hasn't missed a beat since installation.

Purchased this after trying a cheap CHC knockoff. Just printed a custom mount to be able to use with CR10/Tevo and thermistor and hoyend work great.

the ability to swap the whole hot end is great for my p1s. its great that i can swap out just the hardened nozzle

Ce KIT est parfait si vous voulez pas acheter des assemblages completes de toutes les diametres ( 0.2, 0.4, 0.6, 0.8 mm..... ) avec les fans, et le termostat et l'element de chauffe .... vous avez juste a chauffer la buse a 240 degrés et vous changez la grosseur de buse d'impression, sa se fait en 8 minutes, sans tout debrancher !!!, je suggere cet achat.

This hotend is the best Mod I have found thus far for a bambu labs printer by far. The ability to change nozzles quickly and to use CHT nozzles has really been a game changer for me. My print speeds have gone up a little higher. With the CHT nozzle I have been able to hit very close to 500mm/s with PLA. PLA! Given how much less it is to buy a nozzle for this hotend, vs buying a new hotend from Bambu Labs. A new CHT (high flow) nozzle is between 6 to 20 dollars (if you want a ruby nozzle its in the 20's). So $6 dollars for a new nozzle vs $35 from Bambu Labs. Setting up the hotend can be a bit of a pain in the butt, the first time (but it is exactly the same procedure if you are going to set up a new hostend from Bambu Labs. dont use too much of the heat contact paste for the heater, then slide the clip in the right orientation onto the hotend. Screw in your nozzle, then put on your sock (after you clean your hands from the contact paste). Add the fan to this hotend then you can mount into your P1S or P1P.