Avata 2 Propeller Guard Protector, Anti-Collision Prop Bumper Silicone Protective Cover Ring for DJI Avata 2 Accessories

Fits great and does the job.

Cits well, easy on and off so you can fit the drone in a case such as Lykus.

Well-made flexible soft rubber to protect your drone, which is even more important now with the ongoing DJI ban. The bright colors boost visibility in case you have a forced landing and need to find your drone. Super easy to install. If the bumpers don't slip on easily and snugly, then you just have them on backwards. The rubber firmly grips the drone without glue, screws, or anything else. Takes a half second to remove the bumpers which is very helpful if you store your Avata 2 in a cut-foam case. The Avata 2 won't fit with the bumper guards on unless you cut the foam. On the other hand, the Avata 2 will still fit in the DJI shoulder bag with the bumper guards in place.

Great, nice & simply installed impact support

Very tight/snug fit. Recommend double checking the fitment around the inside of the thickest area of the prop guards as it sometimes takes a bit of extra pressure the get it all the way around the guard, but once that’s done it’s not going anywhere! Also it does matter which piece goes on which side of the prop guards. If you put them on the wrong side they won’t wrap around the thickest part of the prop guards correctly so it’s pretty easy to tell if you’ve got them installed on the wrong side. Flown with it several times without issues. Might affect the aerodynamics a bit but worth it to me for the added peace of mind.

They fit nicely. Easy to remove and put back on. Appear to add some protection. For the price it's worth the extra protection

They made nice a bit lose but nothing crazy

Causes prop wash and flight stability issues when flying aggressive manual. If you are using the little Wiimote meme then you’ll be fine, but if you fly actual FPV and do stunts these will make you crash eventually as the extra weight and instability in the thrust cause you to lose control when doing hard banks. Good for beginners who are just learning to fly, but bite the bullet, you are going to crash your Avata, and you just need to be okay with it.

Fit well, looks good, did not affect flight in any way. Now I did as precaution use a vey small zip tie to hold it in the middle in the event of a bump i didn't want it to shift and hit the props just for my own piece of mind, over 100 successful flights with it on zero issue or movement 2 crashes zero damage !

Bought these recently for my new Avata 2 drone. Fits great but had to cut a little off one end of each guard which sits closer to the front of the drone to make a perfect fit. This was a simple as using a pair of scissors and fits perfectly now. Also, took my drone out for it's 3rd flight, still getting the hang of things. Thought i'd be smart, put it in sports mode and try some tricky manoeuvres. However, I flew straight into a pole at about 30-40km/h. The drone survived without a scratch. The guards came off but protected the drone. Fit them back on and kept on flying. Great purchase.

I’m still learning to fly drones (in manual mode) and shortly before this purchase I had crashed my Avata 2, snapping a propeller and denting the middle frame in certain spots around that prop. I sent it away for repair (DJI Care Refresh is amazing btw!) and purchased these for a little extra protection. Just knowing they were on the drone gave me extra confidence - and I crashed again a few flights later. My first crash (no guard) was a 2/10, it bumped into a metal goalpost at 10kmph and fell about 15m to the grass. My second crash with these guard protectors on was about a 7.5/10, hitting the same post at 20kmph and losing control, repeatedly slamming into the grass and accelerating back into the air for about 80m until it hit a tree and finally disabled the motors, falling 10m onto a brick surface. Total damage? A thin pencil-sized gouge on the top frame, a cracked prop, and grass/leaves wedges into the guards. The prop even hung in long enough to turtle mode and fly back to me before being replaced! There’s obviously no way I can say “the guards definitely saved me from a repair/replacement” but I can say that I’m very confident that is true. I sadly lost one of the bumpers in the carnage and couldn’t locate it, so I returned here to buy another that wasn’t black (to be easier to locate if lost). However, only the black type was available domestically so I bought the same type/brand in red from another seller with overnight delivery. Other than the availability of all colours, I certainly recommend these to anyone who is learning or just wants a little protection around their drone!

Cannot protect against impact. Only scratches.