KTC Cons Labs V3 CNC Shield(A4988 Driver) for Engraving Machine/ 3D Printer
Thumbnail 1Thumbnail 2Thumbnail 3

KTC Cons Labs V3 CNC Shield(A4988 Driver) for Engraving Machine/ 3D Printer

4.3/5
产品编号: 64744740
安全交易
经常一起购买

描述

  • Grbl 0.8c Compatible. (Open Source Firmware That Runs On An Arduino Uno That Turns G-Code Commands Into Stepper Signals) 4-Axis Support (X, Y, Z , A-Can Duplicate X,Y,Z Or Do A Full 4th Axis With Custom Firmware Using Pins D12 And D13) 2 X End Stops For Each Axis (6 In Total)
  • Spindle Enable And Direction Coolant Enable Uses Removable Pololu A4988 Compatible Stepper Drivers. (A4988, Drv8825 And Others) Jumpers To Set The Micro-Stepping For The Stepper Drivers. (Some Drivers Like The Drv8825 Can Do Up To 1/32 Micro-Stepping )
  • Compact Design. Stepper Motors Can Be Connected With 4 Pin Molex Connectors Or Soldered In Place. Runs On 12-36v Dc. (At The Moment Only The Pololu Drv8825 Drivers Can Handle Up To 36v So Please Consider The Operation Voltage When Powering The Board.)
  • This Expansion Board As A Driver Expansion Board, Can Be Used For Engraving Machines, 3d Printers. It Has Total Of Four Slots, Can Drive Four A4988 Stepper Motor. Each Stepper Motor Only Need Two Io Ports. In Other Words, Six Io Ports Can Be Well Managed For Three Stepper Motors. Very Convenient To Use. Latest Arduino Cnc Shield Version 3.03

This Expansion Board As A Driver Expansion Board, Can Be Used For Engraving Machines, 3d Printers. It Has Total Of Four Slots, Can Drive Four A4988 Stepper Motor. Each Stepper Motor Only Need Two Io Ports. In Other Words, Six Io Ports Can Be Well Managed For Three Stepper Motors. Very Convenient To Use. Latest Arduino Cnc Shield Version 3.03 Grbl 0.8c Compatible. (Open Source Firmware That Runs On An Arduino Uno That Turns G-Code Commands Into Stepper Signals) 4-Axis Support (X, Y, Z , A-Can Duplicate X,Y,Z Or Do A Full 4th Axis With Custom Firmware Using Pins D12 And D13) 2 X End Stops For Each Axis (6 In Total) Spindle Enable And Direction Coolant Enable Uses Removable Pololu A4988 Compatible Stepper Drivers. (A4988, Drv8825 And Others) Jumpers To Set The Micro-Stepping For The Stepper Drivers. (Some Drivers Like The Drv8825 Can Do Up To 1/32 Micro-Stepping ) Compact Design. Stepper Motors Can Be Connected With 4 Pin Molex Connectors Or Soldered In Place. Runs On 12-36v Dc. (At The Moment Only The Pololu Drv8825 Drivers Can Handle Up To 36v So Please Consider The Operation Voltage When Powering The Board.)

评论

4.3

全部来自已验证的购买

R**

Working nice. This is V

Working nice. This is V.3.00. PWM output for spindle for grbl 9. are interchanged. Just connect Z+ for PWM. It'l work

S**R

The product is of good quality except for one or two slightly bent connector ...

The delivery was a little late than expected, but that's okay. The product is of good quality except for one or two slightly bent connector pins and I am yet to test it.

A**R

Good

Sheild is good

J**N

Nothing great about it

It is an okay product. Nothing great about it, but it works. And at this price, cant really complain.

常见问题

TrustPilot

TrustScore 4.5 | 7,300多个评论

法蒂玛 A.

我尝试过的最好的国际运输。物有所值!

3天前

Pooja R.

客户服务超出了我的预期。非常适合购买在其他地方找不到的产品。

1 周前

全球购物,通过 Desertcart 享受优惠
物有所值
各种产品的价格具有竞争力
全球购物
为 200 多个国家/地区的 3 亿多购物者提供服务
增强保护
深受全球购物者喜爱的值得信赖的支付方式
客户保证
深受全球购物者喜爱的值得信赖的支付方式。
沙漠车应用程序
随时随地随时随地购物。
HK$100

关税和税费包括

Hong Kong店铺
1
免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

TrustPilot

TrustScore 4.5 | 7,300多个评论

Ayesha M.

产品与描述完全相符。对我的购买非常满意。

5天前

阿里·H.

发货快,包装精良。Leatherman 工具手感非常高档和坚固。

1天前

Ktc Cons Labs V3 Cnc Shield A4988 Driver For Engraving | Desertcart Hong Kong