Anycubic Kobra 3 3D Printer Only, Max 600mm/s High Speed, Multicolor Printing Requires Additional Anycubic ACE PRO, Upgraded Details Easy and Smooth, 4.3" Adjustable Touchscreen 250*250*260mm Size

The Anycubic Kobra 3 has been an excellent printer so far. The high-speed printing is noticeably faster without sacrificing quality, and the motion system feels really solid. Setup was simple, and the auto-leveling works perfectly. The adjustable touchscreen is clear and responsive. While multicolor printing needs the ACE Pro add-on, the printer itself delivers smooth, consistent results right out of the box. Great value for anyone who wants speed and reliability in a compact size.

Update - I was told I would be reimbursed for $70 because of the printer head I had to purchase..... Never seen it and they stopped sending updates.. This is my sixth Anycubic-branded printer, and while I’ve seen potential for improvement in their products, USE ORCA SLICER FOR THE ANYCUBIC KOBRA 3! The first 100 hours of printing were entirely spent troubleshooting, and not a single multicolor print came out properly. Their proprietary software is unreliable and consistently leads to print failures. One critical issue is that the printer forgets its homing location, requiring you to calibrate and perform a resonance test before every single print. This adds significant time and frustration to the printing process. I strongly advise against leaving this printer unattended during operation. If you’re considering alternatives, even if they cost a bit more, such as the A1, I recommend going for it. I’ve already gone through two hotends, both of which completely destroyed the printer head, resulting in malfunctioning lights and wasted prints. Anycubic, I’m looking forward to seeing how we can resolve these issues. It would be helpful for you to release a formal statement addressing these concerns. Sharing this feedback on your social platforms would also provide users with a transparent understanding of your products and foster better communication with your community.

I love this printer. I have had it a few weeks now and still works great.

It’s an ok budget printer.

This is a fantastic printer, super fast and reliable. It may not be the easiest printer to use, but it's not bad. Took some time to figure out proper bed adhesion, but using the auto bed leveling prior to each print has resulted in flawless adhesion for over 100 prints now. HUGE upgrade from my old Ender 3.

I was excited to try this out since I haven't had good luck with the P1S and wanted multicolor ability. Setup was fairly easy but lots of sharp edges and now I have more than emotional scars from this purchase. What isn't said on the sales page is they all but force you to use their app. I was never able to get this connected to their Anycubic slicer even in LAN Only. Followed the instructions, updated firmware and still no connection. The slicer could not detect the printer even when I input the IP address from the machine. I was able to print a Benchy and a goofy shark bottle opener from the included USB but after hours of wasting my valuable time, I just gave up. For the amount of money these machines cost, they should just work. You should not need an engineering degree to make it work since they advertise simplicity. The print quality was ok, but it took 35 to print a Benchy so speedie is not how I would describe the Kobra 3 Combo. I didn't bother trying the ACE system since I was never able to get it connected to the slicer. The search continues. Bambu and Anycubic both try to trap you into their ecosystem and their products are spotty at best.

From the very first print I've had trouble with this printer being consistent. After checking all calibrations, and making sure everything was tightened to where it should be, STILL INCONSISTENT PRINTS. So I decided to look at the hotend, and it was BENT. I looked to see if maybe it was supposed to be bent, and it is not. All the other ones are straight as can be. Very disappointed that this got by a QC check. I've wasted a lot of time trying to diagnosis this, and filament. I hope this helps someone.

I absolutely love this. It was fairly easy to put together and I was able to use it immediately. I can't get it to connect to Orca but it does work okay with the Anycubic Slicer