CryoGrip Pro Glacier 235mm

I wasn’t sure what to expect, but this build plate really impressed me. The adhesion is solid—prints stay put during the job, and they pop off easily once it cools down. The textured surface helps give prints a clean, professional look.I also really appreciated its affordability. With how expensive 3D printing accessories can be, this felt like a great deal. It works great with my Bambu Lab printer and feels like it should cost more than it does. Definitely worth checking out if you’re looking for a reliable upgrade.

I've been 3D printing for over 10 years and used many different print surfaces and adhesives but the CryoGrip Glacier plate is the best solution I have found to date. I bought this for my FlashForge ADM 5M Pro. It is very easy to use as NO adhesives are required. Just heat the bed to 50C and print. I've had 100% success with this build plate since my first day. Some prints may be difficult to remove and you could damage them if you just yank them off. If you get resistance just flex the plate and the print will pop off. HIGHLY RECOMMENDED !!!

I have two kobra 3s and one of them had a z-axis calibration issue which caused it to remove all of the top textured of the original build plate in a 2" diameter circle, so I needed a replacement build plate. I had been reading about the cool plates so I decided to try this one (CryoGrip Pro Glacier). I was really interested in not having to use any sort of bed adhesive, like glue sticks. I hate having to remove the glue stick residue from the prints, it's not hard, it's just a pain.When this build plate arrived, I immediately put it on the printer and printed a benchy, because it's fast and I knew what to expect from the printer. It printed great, no bed adhesion issues. I've used this plate daily for almost a month and I have not had a single print failure due to a bed adhesion issue. The models just stick to it. As a matter of fact, they stick almost too well to it; I've had to start using a metal scraper to remove some models (gently of course).According to the instructions, the bed temperature should be between 45 and 55 degrees C for PLA and the default temp for pla on the kobra 3 is 60. It's easy to adjust the bed temp on the kobra 3 and I have managed to change the default temp to 45; however, the default doesn't stay at 45 for more than 3-4 prints before it's somehow back to 60. So I just try to make sure it gets changed to 45 every time. However, sometimes I miss it and the temp isn't adjusted the bed temp is 60 the whole time, I haven't found that has had any impact on the quality of the prints.This plate is textured, however, it is finely textured, it's not quite smooth but it's pretty close. There is a very noticeable difference between the feel of models printed on it versus those printed on the textured plates.I'm very happy with this plate. I actually ordered a second one about two weeks after I ordered the first one. These are now my go to build plates.

Excellent bed adhesion and smooth finish on prints. Works great with PLA and PETG.

Love using the Cryogrip build plates. They provide superb adhesion and rarely have any issues. Not a huge fan of them for PETG, as it has tended to stick TOO hard and removed the coating.Would have given 5 stars for this purchase, but received a returned plate. It had clearly been used before as evident from the outline of a print and the usage of the nozzle cleaning area

It holds and it does what it says. My favorite plate. Works on everything.

On the third print, using the same PLA and settings, the coating is coming off. The plate was cool, it was overnight from the print before I removed the item. For the first prints, it was wonderful! Adhesion is fine, released well.

We've been 3D printing for 3.5 years now and have 9 printers and a business. We got these cryogrip plates in the hope that we could cut down on brim usage when printing many of the same item on one plate (optimizing print settings too, of course). They worked fantastic for a few weeks, and then even with proper care following the instructions, they started having adhesion loss. But what was worse, on some of them, the coating started flaking off. We have one of the instruction pages hanging above the printers and between my husband and I, we made sure to follow it to a T for best performance. These just don't seem to have the longevity durability of a regular PEI plate. It's a shame, because we bough several. I have cleaned them well and am still using them on some projects I want a less textured finish without swapping to smooth plate, but I am finding I often still have to add a brim. I have optimized brim settings so it's not as big of a deal removing brims, but it's one less step I want to do when we've spent a couple hundred dollars buying multiples of these plates. We could have just stuck with the stock PEI.