Footswitch Topper Guitar Pedal Button Caps with 3 Set Screws and Protective Fitting Increasing Accuracy,Comfort for Common Switches diameter of 3/8"| SOLUTEK BUTTONS V1 12Pcs Red Blue Gold

Very good price, and work well as switch tops for my pedals! Like that there are multiple colors - but would like for there to be at least one more of every color in this set. Make it easier to tap the pedal switches. Feel solid and fit well - the set screw takes care of making sure they stay on. The only pedal I couldn't make this work on, was my SansAmp (top left pedal) because the OEM switch cap on it is too short for this to fit properly.

I think these are great news the bigger target to hit knockout damage anything and also protects your pedal a little bit from Skoops specialty trying to preserve them if you’re not more power to you.

Only problem I found with these caps, is they can block the power on off light from view with some pedals. But they look great and attach easily.

Excelente producto

These are great because personally I always had to have some kind of shoe on to activate the switches on my pedals.Now not only can a use my bear feet. But the switches are easier to turn off and on.Not to mention that the material is metal and these seem to be high quality.

These buttons seem sturdy and are decently easy to apply, but they have one major flaw: they are too deep to use with many modern pedals. They work great for large button mainstream manufacturers i.e. MXR, EHX etc, but for many new or boutique pedals that have a shallower or narrower footswitch, these won’t work as is.I got these to specifically to accommodate one particular pedal: the Caroline Meteore. Unfortunately, the newer style foot switches on this pedal are very narrow and don’t work with the cheap press-on plastic footswitch big buttons, so I bought these since they have screws to tighten them down.Unfortunately, the buttons are so deep that when I finally cranked the screws down enough to get them to stay on, the depth of the button prevented the pedal from engaging. Once I plugged my pedalboard in, this same problem presented itself on pedals with seemingly normal sized foot switches but shorter travel such as the JHS Crayon, Fairfield Circuitry Barbershop, and even a TC Hypergravity Mini.I took all the buttons off and was about to return them when I remembered I had a box of rubber o rings lying around, and decided to try them as spacers to take away some depth on the inside. The 6x2 mm fit best. After a bit of maneuvering and tightening down the screws as far as they would go, it worked! Time will tell if they stay on, but I’m going to keep them and hope for the best.I’ve never tried Barefoot Buttons and by the looks of them they might be a bit shallower, but then again, they may not. And you get 12 of these for the price of 2 barefoots so I can’t really complain. So if you’re going to get these, grab a $10 box of rubber o rings as well to make sure they work with all of your pedals. If these came with a few 1 and 2 mm spacers to reduce the depth they would be perfect.

Perfect for that musician building their pedalboard and needs a little better foot switch to hit when they need it on. These go on simple and easy.

After careful consideration, I chose these Solutek pedal buttons. As you can see I needed almost 2 dozen. (I have another multi-stomp with 4 more switches.) The ones I saw at my "go-to" online retailer were about $10 each. So these were the most comparable and saved me $175! This is something that you can pay a bargain price for since they're not a necessity. I just wanted them because I usually don't wear shoes around the house.It's a bit tedious putting 3 little screws into each one but I suggest you get a little cup, pour those suckers in, sit in front of the TV and have at it. Took me about a half hour to do all 24. Just keep something under them in case they drop. I lost 2 in my carpet that only the vacuum cleaner will find. They fit all my pedals perfectly and they all work great. As you can see my board has a variety of brands so not all the switches are the standard "mushroom" type. The Wampler Latitude and my midi controller for my amp (big black switch at bottom) have a slightly slimmer profile. But they stay on and work. The only caveat to consider when buying these solid buttons is if you have lighted foot switches, i.e., Line 6 Pods, etc. They will block the lights so you may want to opt for plastic ones. But I couldn't find any transparent ones that had screws to hold them on. Luckily none of my pedals have lights under the buttons. I bought 2-12 packs @ $20/each. So at $1.67 apiece, they are a great deal. And if more than 2 of them fall off, I guess I'll go back to wearing shoes when I play.