Nema 23 Closed Loop Stepper Motor Drive kit 3NM DC36V 1.8° 2HP for CNC Laser Engraver Machine Cutting Machine

描述

Package1x Close loop stepper motor(with 118 inch Power Cable)1x Close loop stepper drive1x Encoder cable(118 inch )DriveType: DSP Closed loop vector control stepper drive maximum peak current: 5AImpulse response frequency:200KhzMicro-stepping driver: 200~51200pprVoltage:DC 24-60VProtective function:Over voltage, over current, tracking error, overproofSignal input: Support PUL/DIR and CW/CCW modes (difference)Compatible: 5~24V signal (Don't need a resistor)Continuous overload:Output an alarm signalType of cooling:Air-cooling Environment:Keep away from dust, oil, corrosive gas, high humidity and high vibrationApplication temperature:0~50 degree centigradeHumidity: 40-90%RHShake: 10~55Hz/0.15mmOutput Current:5AInput Voltage:24 - 36 - 60 VDC ( Min - Typical - Max )Logic Signal Current: 7 - 10 - 16 mA ( Min - Typical - Max )Pulse input frequency: 200 ( Typical )Isolation Voltage: 500 ( Min )MotorStep angle: 1.8 degree +/-5%Phase: 2 phaseRated voltage: 3.4VRated current: 4 AResistance: 1.15 ohm +/-10%(At 20 degree centigrade)inductance: 3.6mH +/-20%/PhaseHold torque: 3.0N.m Insulation: BRotor inertia: 800g.cm2weight: 1.4kgAdvantage❤HBS57 uses DSP chip and vector loop control technology.❤High control precision and reliable, low noise, little vibration, no step lose .❤When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system.Benefits for you❤No need for complicated parameter adjustments, more convenient;❤No vibration when stopping at high speed, stable when stopped at zero speed❤Very fast position response, especially suitable for short-distance fast start-stop situations❤50% lower cost, higher torque and smaller mounting size compared to servo systems