Q: What is a "gas discharge tube", and what is its function in this device?

A gas discharge tube is basically a over voltage protector. It is an open circuit until impinging high voltage enters an ionizes the gas inside which creates a low impedance presumably to ground. Only useful in a lightning incident (nearby or direct hit). If the latter then you are fundamentally screwed. I have photos to probe it. Message: if lightning is near (or predicted) then simply disconnect everything. Let us ALL float. I’m talking antennas, AC power cord and ground wires

Q: Does this device support 24v passive poe?

YES , this will easily support 24volt passive or non-passive POE. Normally POE is 48volts on power injectors or network switches. I know that it will support over 60 volts, as to smart 3 lens outdoor cameras that i have installed at Banks. This is , if you ground the DIN rail correctly to allow gas discharge tube to function properly to protect equipment. Gas discharge tube opens and closes data circuit, with no ground it will just act as a fuse and burn up after lightning strike. I always use TWO ethernet surge protectors , one on network switch rack and one upon entry into building with both TWO DIN rails grounded. Daniels Data Inc. - Dallas,TX - John Daniels

Q: How long of a rail do you need? What is the shortest length that I can use?

It mounts perpendicular to the dinrail so about 1” is minimum. I’d use enough too have two acres in the rail though or it will rotate.

Question 1

Will this protect poe++ or just poe+?

Accepted Answer

From the manufacturer's website

Nominal PoE Voltage <60 V
Maximum continuous current 1.2 A

Therefore you should be able to get 60 watts continuous, or Type 3 PoE++

Question 2

What is a "gas discharge tube", and what is its function in this device?

Accepted Answer

A gas discharge tube is basically a over voltage protector. It is an open circuit until impinging high voltage enters an ionizes the gas inside which creates a low impedance presumably to ground. Only useful in a lightning incident (nearby or direct hit). If the latter then you are fundamentally screwed. I have photos to probe it.

Message: if lightning is near (or predicted) then simply disconnect everything. Let us ALL float. I’m talking antennas, AC power cord and ground wires

Question 3

Does this device support 24v passive poe?

Accepted Answer

YES , this will easily  support 24volt passive or non-passive POE.
Normally POE is 48volts on power injectors or network switches.
I know that it will support over 60 volts, as to smart 3 lens outdoor cameras that i have installed at Banks.
This is , if you ground the DIN rail correctly to allow gas discharge tube to function 
properly to protect equipment. Gas discharge tube opens and closes data circuit,
with no ground it will just act as a fuse and burn up after lightning strike.
I always use TWO ethernet surge protectors , one on network switch rack and
one upon entry into building with both TWO DIN rails grounded.
Daniels Data Inc. - Dallas,TX  - John Daniels

Question 4

How long of a rail do you need? What is the shortest length that I can use?

Accepted Answer

It mounts perpendicular to the dinrail so about 1” is minimum. I’d use enough too have two acres in the rail though or it will rotate.

ASIN	B078PDRW12
Best Sellers Rank	#53,653 in Electronics ( See Top 100 in Electronics ) #451 in Surge Protectors
Brand	Tupavco
Color	Black
Compatible Devices	Servers
Customer Reviews	4.2 4.2 out of 5 stars (37)
Enclosure Material	Aluminum
Manufacturer	Tupavco
Mfr Part Number	TP316
Model Number	TP316
Mounting Type	Rack Mount
Number of Items	16
Number of Packs	1
Size	16 Ports Rack
UPC	638362929488
Unit Count	16 Count

Rackmount

Details

Details

Description

Specifications

Common Questions