2-cb1106e2e21969f3.js","9888","static/chunks/9888-d48720c0d3cecfaf.js","1623","static/chunks/1623-8f9c42c74ef44b22.js","9678","static/chunks/9678-bc3175fdc66b489e.js","8275","static/chunks/8275-bc0cd43a5d16c2eb.js","8556","static/chunks/8556-0661fc57cf5e861e.js","1801","static/chunks/1801-ff2957ded3b42991.js","2177","static/chunks/2177-75a725a1c0a3636f.js","2450","static/chunks/2450-2af1615d1ec02554.js","3690","static/chunks/3690-d6ce99b634a3c6d6.js","6849","static/chunks/6849-a5aa65d17e203de5.js","298","static/chunks/298-222bf2d33590277a.js","7820","static/chunks/7820-25836c09109f5f87.js","686","static/chunks/686-da86c4d4102875ea.js","2755","static/chunks/app/%5Bdomain%5D/%5Blang%5D/(main)/products/%5BproductIdTitle%5D/page-0c5c4255033b3ed7.js"],"default"] 35:T752,

EasyDriver stepper motor drive is easy to use, can work with any Pulse signal equipment which output is 0-5V (3V please Short circuit SJ2) .

Kit include：
1pcs Easydriver board
1pcs 142 hybrid 2 phase 4-wire stepper motor
1pcs middle breadboard
10pcs jumper wires

CODE#define DIR_PIN 2
#define STEP_PIN 3void setup() {
pinMode(DIR_PIN, OUTPUT);
pinMode(STEP_PIN, OUTPUT);
}void loop(){ //rotate a specific number of degrees
rotateDeg(360, 1);
delay(1000); rotateDeg(-360, .1); //reverse
delay(1000); //rotate a specific number of microsteps (8 microsteps per step)
//a 200 step stepper would take 1600 micro steps for one full revolution
rotate(1600, .5);
delay(1000); rotate(-1600, .25); //reverse
delay(1000);
}void rotate(int steps, float speed){
//rotate a specific number of microsteps (8 microsteps per step) - (negitive for reverse movement)
//speed is any number from .01 -> 1 with 1 being fastest - Slower is stronger
int dir = (steps > 0)? HIGH:LOW;
steps = abs(steps); digitalWrite(DIR_PIN,dir); float usDelay = (1/speed) * 70; for(int i=0; i digitalWrite(STEP_PIN, HIGH);