Howard ProductsRestor-A-Finish, Wood Stain to Restore a Finish for Wood Surfaces, Golden Oak, 16 Fl Oz, Pack of 1

I’m absolutely thrilled with this product! I was planning to redo my stairs but decided to try this instead, and it worked wonders. For just $10, my stairs look brand new! It only took me about 20 minutes to clean and stain them. I used a microfiber cloth and simply wiped them down. I highly recommend this product!

Amazing item. We have soft pine wood work/trim thought out our home. Was a simple fix. Just while on with soft cloth and allow to dry. Looks brand new. We have soft pine which the worse for marks a scratches. Excellent product

This product works well on refreshing wood furniture. It adds "matching" color to scratches, scraps and dings the furniture may have picked up over the years while adding a bright shine. With some steel wool it also gets rid of stubborn superficial blemishes. The steel wool work well around all the legs/feet of furniture.I used it on my 20+ year bedroom set (bedframe, 2 nightstands, 2 oversized dressers, desk and chair). The whole set looks great. The set only had minor problems but for 2 areas. This is where don't expect miracles comes in. I did not expect this to work on my issues and it did not. One night stand has water damage and the desk has an area where the finish has worn down to bare wood (from arms resting on it while doing computer work.) I will need to sand and refinish these the traditional way. Also if you have a deep scratch/ding, it will not fill it in. It will only add color to it so it is not a noticeable.Hope this helps. This is something to use before problems get out of hand.

The first two photos are before and the last three are the afters.This product is so easy to use. No gloves, no strong odor and not hard work and really reasonably priced considering how well it works. You simply apply it to the .0000 steel wool pads and follow their instructions (which are basically a one two three). I did this hyge piece in about 2 and a half hours (maybe even less). I then followed up with their Feed and Wax product and you can see the end results are beautiful! I highly recommend this if you really don't want or need to actually strip your piece. At first I thought this would only be a temporary fix, but I did this on Saturday 1/4 and it still looks brand new. I have tried similar solutions but they only hid the damage temporarily (just evaporated) but this really goes into the wood like magic. If you try it, you will not be sorry

I have always liked Howard Products. Restor-A-Finish has certainly confirmed that again. I have a large floor that gets a lot of hard wear. ( I had 5 indoor cats.....down to two now ). I hated the thought of having to hire someone to sand and finish this 15.5 ft x 22 ft. floor. So, after reading the write-up of this product, I decided to try it first. The floor was so bad it couldn't hurt to try. I was totally amazed and blown away by the beautiful results. I had purchased 2 - 16oz. cans but needed only one. My floor is gorgeous and believe me it was badly in need of restoration. I am so very glad I tried this product and as they suggested will apply their Feed and Wax product now. My floor is oak so I purchased the Golden Oak color and it did a fantastic job. Super easy to apply...I just used a rag and elbow grease and didn't skimp on the product. My floor was really bad and now looks great.

Nothing except total refinishing will make old, scratched, damaged furniture look new. But some products have the ability to make it look really good, and this one of those products. I used the suggested 0000 steel wool pads and poured the restorer on the pad. Wiping with the grain of the wood, applying various amounts of pressure depending on the severity of the damage. Once the first round was applied and then wiped off with a clear cotton cloth, I waited 30 minutes and repeated the process. Then did it again a third time. The product really works well, but again, it's no miracle worker.Several thoughts on the product. First off if the finish is chipped or gouged to bare wood, this will not improve that area. You need a furniture color pen to darken the wood, or use a filler and then a furniture pen and blend the area to match. Also start with a light color restorer, (I used the Golden Oak), and if that doesn't work as well as expected you can also go to a darker shade, but you can't go from dark to light. Finally the rags you use as well as the steel wool will be hazardous due to the solvent they retain. Rags with solvent can self-combust so please dispose of them properly. I suggest either soaking them in water before placing them outside in a closed garbage can or in a metal can with the lid tightly closed. I usually have a few empty paint cans from a big box store just for such purpose.The photos speak for themselves. A good product for easy refinishing to a much better finish.

Used this on my solid oak kitchen cabinets. Cleaned the cabinets then applied the product. It was easy to apply, no offensive odor, and worked great. 43 year old cabinets look almost new. Very pleased.

Bought to use on my cupboards, didn't care for the look