Rebuild kit for Edelbrock Carburetor

Just used this kit to finish a refresh on an Edelbrock 1406 carburetor. Used all the bits I needed and there were a couple left over that I assume are for other variants of Edelbrock or Carter carbs. The gaskets were great quality and fit perfect, look almost identical to the original gaskets I removed. And the metal accelerator pump fit great as well. I’ve got another 1405 Edelbrock on my bench that needs to be gone through, so I’ll order another of these kits when that time comes!

metal accel pump does not come with accel pump return spring overall a great kit used it on a edelbrock 1405 on a 1966 Plymouth sport fury 383 engine be sure to follow the instructions to make the carb really preform well it has to have certain distance for the floats to hang down in the bowls and a certain height they have to be to shut off the needle and seat and also make sure your accelerator pump rod is the proper distance sticking out of the carb to really give it the right amount of accelerator pump travel you bend the rod that goes from the pump rod to the throttle also for default setting i went with 1 1/2 turns so 3 half turns on both idle mixture screws make sure your throttle has full travel with your gas pedal barely crack open your idle set screw for your throttle if you got no gas in it you might have to give it a little from the top first but not too much if everything is right it should turn on without any pumping required in about 10-15 seconds it will have enough gas in the float bowl to idle you adjust your idle set screw and get it to like 750 rpms then do a part wot hit for one blip and you will see how good these edelbrocks can be

The kit itself is great, and the parts seemed as good or better than the originals. The instruction included, though, are a photocopy rather than a printout. The photocopy is not clear, and the right 1/2" of the page is cut off. Which wouldn't be such an issue if the adjustment measurements weren't in that 1/2". A search on Edelbrock's site gave me the full instructions, but those were actually slightly different from the ones in the box. I followed Edelbrock's adjustment specs, and the car started up right away.

Good rebuild kit. great instructions and diagrams included as well

I just received this kit and have not installed it yet. I will update this review when it is installed,. Looking at the kit, it is not bubble wrapped on a piece of cardboard. It comes in a zip lock bag with a staple in it to keep it from coming open. It has the needle and seat ( two piece ) and it has everything needed to renew your carb. I was delighted to see the air horn gasket, as I have not received one of those on a renew kit, until now. My carburetor is the Carter Competition Series 9605S. The needle and seat is the standard issue. If you want the spring loaded series you will have to order them separate. They control the fuel flow better for rough conditions, such as on a 4 wheel drive. The gaskets are thick and installed with no problems. The accelerator pump is 3/16 of an inch longer than the original, no big deal, just use the top hole in the 3 hole linkage plate. I have been putting kits in carburetors for many years and considering what comes in this kit, it is overpriced. You get good gaskets, and there is not that many for this carburetor series, and a lower quality needle and seat. I live in small town America and don't have access to parts like in a big city. I have purchased complete kits with all kinds of optional parts, such as different size shooters, etc. for less money.

Kit worked perfectly to rebuild my Edelbrock 1406. No leaks, perfect operation. I would buy again.

I still offer a 5 star rating, have used Allstate many, many times directly. One of the absolute best fuel system parts resources in the country. Will continue to purchase from Allstate. However, I had noticed this particular kit on Amazon, with quick shipping. And, I happened to have a customer emergency. Upon receiving the rebuild kit, I noticed that the package had been opened, and, new parts were missing. Unfortunately, I had to install a good, used, serviceable part, to satisfy my customers urgency. I have NEVER experienced this from Allstate Carburetor.

This kit is more complete, just as high quality and $15 cheaper than the genuine Edelbrock 1477 kit.