AVLT-DM26-1

I purchased the AVLT-DM26-1 for use with three 27" ACER monitors. The staff at AVLT were very responsive and recommended the addition of two extra leg extensions to allow the side monitors to move at an angle relative to the center monitor. With the extra extensions, I found the side monitors could be rotated even up to 90 degrees. This stand is very well built, rugged and has a great design. The parts went together perfectly and will hold the three 10 pound monitors with no problem. This is an excellent quality product, and I would definitely purchase it again. This is the way to go if you are building a flight sim cockpit and need a way to hold your monitors at any angle. The folks at AVLT are very helpful.

This stand is amazing. Clamping from the top makes is absolutely zero hassle to get on, especially if you have a panel on the back side of the desk that can get in the way of clamping from the bottome like I do. The spring hinges are super sturdy and simply drop into place. Fiddle with the tightness of the spring and then you are able to easily adjust the position as you like and it will hold in place. Never have to worry about sagging arms. I would say this is perfect. My ONLY issue, and the reason for 4 star, is it says it works for monitors up to 27 inches. While this is true, the arms arent quite long enough to angle the side monitors as much as I'd like. I think ideally to say it works with a monitor size it should be able to angle 45 degrees from the center monitor. An extra inch or so per arm would have totally solved this

Assembly was pretty straight forward. Tension adjustments on side mounts hold well once adjusted. Center mount tightens well and holds monitor nicely. Mount is sturdy, however given that I couldn’t use the clamp as my desk doesn’t have a lip in the back, I had to drill a hole through my desk and mount to that. But I’d rather mount it that way. Not because clamp is poorly made, it’s just that we’re talking 3 monitors here. Couldn’t hurt to have it be as sturdy as possible. The only thing that I could see being a potential problem was that upon removing the pieces from the box, I found 2 very small set screws in the bottom of the box. The screws would end up being used to secure the center rod to the base. Had I not seen these, I could very well have thrown them out and thought they weren’t shipped with the rest of the items. Set screws are used throughout for securing items to each other. These two were simply not screwed in all the way. It’s not a huge deal, just be sure to do a thorough check for all parts and of all parts. These things happen. Long story short, worth it! Clean look, well built, and though I don’t have a before shot, this mount allowed for a much cleaner and less cluttered desk. My work space feels open and more comfortable.

Very sturdy monitor mount. I have a 27 inch monitor in the middle and one vertical 24 inch and a horizontal 24inch. The stand is nice and sturdy and allows you angle the monitors a good amount (not sure about larger setups but works perfectly for mine). Very easy to install. I am considering switching to a 2 monitor vertical stack and their support was amazingly helpful trying to get me setup. I have yet to try it to see if it's possible, but either way they were quick to respond and very helpful.

I purchased the Aluminum Mechanical Spring Triple computer stand. Dual arm adapter cannot be tightened because excessive paint on screw or in nut. Worst customer support service. There is no phone number available on the website company, product or customer support. Only way is to chat on Skype. If you don't have have mobile number, you cannot create Skype account. Hence you are out of luck. If I could give them negative rating, I would have.

I got overly frustrated with a bunch of stuff that was my own error, but it all started with the pole that holds the arms immediately stripping as soon as I tried to screw it in. I had to slide and reposition the pole multiple times (using two monitors on bottom and one on top) and each time I had to unscrew the pole to adjust the nut. Because the threads basically started stripped, this meant it took upwards of 15 minutes each time I had to screw it back in. I would stand on my desk and push down with all my might and twist until it caught, knowing that it would eventually completely strip all the threads, but not knowing any other option, assuming a return would be denied at this point (I didn't want an exchange at that time). For something so essential to the structure to not be made with good tolerances, is unacceptable. Maybe it's a defect, but it was one of the most frustrating setups I've ever done. What I assumed would take 2 hours, took almost 8. It literally ruined my day and put me in a very sour mood.

An solid 4 stars for sturdiness. Clean design, easy to assembly. However, this stand may fit 24" monitors rather than 27". The 27" monitor cannot be arrange into corner bench with the two side monitor make 90 degree angle, which most work bench would need. Hate to return this one but it doesnot work for my set up

This is 100% the best mount for your money, I read another review saying that it won't hold 27" monitors? Idk what world they live in but I use this mount for a 32" and a 27" ultra wide together and it works perfectly! Set up was a breeze had it on my desk with monitors attached and in place in no time. Super sturdy, easy to adjust, easy to assemble. This is the mount you're looking for, buy it.

Absolutely love this stand. Good quality & awesome price with plenty of flexibility & not many weaknesses. I have 3x Asus 27" VG27 monitors. I can get the side monitors to an angle of about 40 degrees from the front one. Make sure the outer arms are angled down slightly to get the full reach. My monitors are 620mm wide including 7mm side bezels. The side monitors are a lot more stable then i thought. PROS - Great price - Solid build and they are nice and heavy - Well packaged and protected. Individually wrapped and isolated by cardboard so can't be scratched. All screws are in sealed packets - Easy enough to install but takes about 2 hours and can be a little touchy. - Grommet mount is really stable. C clamp should be good as well. - Quick delivery CONS - May not fit 3x 27" screens if you have to angle them and have wide bezels (arms should be 20-30mm wider). - Setup can be touchy but it's very stable once done. - Cable paths could be a bit tight if you have thicker cables or extra cables. Ok for 1 thick monitor cable, a power cord plus another usb device. - VESA mounts have a bit of wobble in them but it actually helped get them monitors lined up and are solid once in place. HIGHLY RECOMMENDED

After doing a very thorough search over few days for a triple-monitor arm product for my home-office setup for mounting 3 x 24" screens, I decided to go with this. I am very happy about the purchase. It is very sturdy, built with quality material and comes with a nice finish. Assembly is easy, so is the arm adjustments for screen positioning. There is a very small wobble/play of screens after they are attached to quick-release attachments at the end of arms using VESA mounts (even after fully tightening 2x hex screws in each of them as mentioned clearly in the instructions), but that is acceptable and not an issue at all because the screens would stay the way you set them to stay. Although not required for my setup, I also like its provision/ability to extend arms further by adding extra extension-arms for better adjustability of screen positions. Would highly recommend this product to anyone who is interested and deciding to buy.

Also if you have 3 x 27” monitors check vey carefully the max allowable width. If you don’t you will have problems. Even with thin bezels I have limited scope for adjusting. It would be great for smaller monitors. Also if you desk is shallow you will struggle with orientation if the desk is against the wall

It's a great stand for the price - much better than the rigid one I used to have. Its easy to assemble and the and adjust the side stands is easy. The detachable VESA mounts make it easy to add and remove the monitors. There was a fair bit of wiggle where the VESA mount joined the stand, but I was able to improve this a lot by tightening up the bolts. As others had mentioned, whilst it can fit 3x 27" monitors, it is a bit tight and I could not get the angle I wanted on the side monitors. AVLT's support through was great, and I was easily able to order the extensions. Now everything is exactly as I wanted it. Overall, I'm very happy with the stand.

This is a good quality sturdy monitor stand. Easily supports my three dell 27" UHD monitors. No sag, squeak, or wobble. Nice balance. The picture I provided shows that even with 27" monitors you can still get a decent enough angle to give you an semi enclosed feeling while sitting at your desk. The company selling these offers great support via the Amazon platform. One tiny grub screw was missing from one of the support arms. Once I reported it via the Amazon app and provided them the barcode from the box, they had the missing part sent to me straight away via an express international parcel service. I got it in a couple of days! Lovely Taiwanese people! RoC rocks! Quality Product Excellent Support Friendly People